{"id":10162,"date":"2022-08-17T08:00:00","date_gmt":"2022-08-17T12:00:00","guid":{"rendered":"https:\/\/www.est-aegis.com\/?p=71"},"modified":"2026-10-22T15:00:55","modified_gmt":"2026-10-22T19:00:55","slug":"electrical-bearing-protection-qa-part-26","status":"publish","type":"post","link":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/","title":{"rendered":"Electrical Bearing Protection Q&#038;A &#8211; Part 26"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Q1.\u00a0 I run a motor shop, and we use the SKF discharge detector (<a href=\"https:\/\/www.skf.com\/group\/products\/condition-monitoring-systems\/basic-condition-monitoring-products\/electrical-discharge-current-measurement\" rel=\"noopener\" target=\"_blank\">TKED 1<\/a>) to detect bearing current.\u00a0 It seems to give very variable results.\u00a0 At what number of discharges per second is there a major problem?\u00a0 On one motor, I recently measured 6000 in 10 seconds.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>A1.<\/strong>\u00a0 That instrument counts the number of discharges per second.\u00a0 But it doesn&#8217;t tell you the voltage at the instant of discharge, and that&#8217;s going to determine how much energy is released, and how much damage is done.\u00a0 So the detector will tell you when there&#8217;s a discharge whether it&#8217;s at 5 volts or 50 volts.\u00a0 The damage increases by the voltage <span style=\"font-style: italic;\">squared<\/span>, so if you double the discharge voltage, you quadruple the damage.\u00a0 So the voltage level is important, as well as the number of discharges.\u00a0 That&#8217;s why we recommend monitoring shaft voltage and looking for the voltage discharge occurs at.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><span style=\"font-weight: normal;\"><span style=\"font-style: normal;\">With that said, in your example, you were seeing 6000 discharges in 10 seconds: that&#8217;s 600 per second.\u00a0 In motors without bearing protection, the average that we see is 1000-2000 per second, so that&#8217;s relatively mild.<\/span><\/span><span style=\"font-weight: normal;\"><span style=\"font-style: normal;\"><\/span><\/span><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Q2.\u00a0 The root cause of electrical bearing damage from VFDs is an imperfect sinewave in the drive&#8217;s output.\u00a0 In that case, a drive manufacturer\/model with the most sinusoidal waveform will have less risk of damage, is that right?<img decoding=\"async\" class=\"alignright\" alt=\"VandI\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/VandI.jpg\" width=\"315\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A2.<span style=\"font-weight: normal;\">\u00a0 In theory, yes.\u00a0 In practice, it doesn&#8217;t make much difference.\u00a0 When you hook up a drive&#8217;s output to a motor, you have current running through the windings.\u00a0 Windings have high inductance, which actually makes them act like a filter for the current.\u00a0 So all drives&#8217; current waveforms are pretty close to sinewaves.\u00a0 They still have a lot of high frequency spikes, but there&#8217;s obviously a sinewave in the waveform.\u00a0 The current in one phase is shown at the bottom of the first image.<br><\/span><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><span style=\"font-weight: normal;\">But the motor doesn&#8217;t filter the voltage.\u00a0 The voltage waveform still looks like a mess of pulses.\u00a0 This is shown at the top of the image.\u00a0 It is those voltage pulses that cause capacitive coupling between the motor&#8217;s components and produce the shaft voltage that discharges through the bearings.<\/span><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><span style=\"font-weight: normal;\">This will be a problem for virtually all drives.\u00a0 The one possible exception, that we know of, is matrix drives, which don&#8217;t include a capacitor bus.\u00a0 Instead of putting out pulses of constant voltage from a huge capacitor, they directly patch together the three <em>input\u00a0<\/em>phases into variable frequency output.\u00a0 Matrix drives don&#8217;t give perfectly clean output waveforms either, but they are orders of magnitude cleaner than what you get from a regular drive.\u00a0<\/span><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><span style=\"font-weight: bold;\">Q3.\u00a0 In connection with the last question:\u00a0 Can&#8217;t you make the drive&#8217;s output more sinusoidal with load reactors, dv\/dt filters, &amp; sinewave filters?<\/span><span style=\"font-weight: bold;\"><\/span><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><img decoding=\"async\" class=\"alignright\" alt=\"NOTsinewavefilter\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/NOTsinewavefilter.jpg\" width=\"300\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><span style=\"font-weight: bold;\">A3.<\/span><span style=\"font-weight: normal;\">\u00a0 Sort of.\u00a0 Load reactors, dv\/dt filters, and common mode filters will smooth out the current waveform to some de<\/span><span style=\"font-weight: normal;\">gree.\u00a0 But they don&#8217;t much affect the voltage waveform, so you will still have a problem with shaft voltage and bearing discharge.<\/span><span style=\"font-weight: normal;\"><\/span><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><span style=\"font-weight: normal;\">There are actual sinewave filters out there that will smooth the voltage waveform into a sinewave.\u00a0 These are mostly used in petroleum and mining applications where the drive is very far &#8211; sometimes kilometers &#8211; from the motor.\u00a0 Because they filter the voltage, they&#8217;re great at cutting down <a href=\"\/electrical-bearing-protection-qa-part-24?hsLang=en-us\" rel=\"noopener\">reflected waves<\/a>, which can kill bearings <span style=\"text-decoration: underline;\">and<\/span> motor windings.\u00a0<\/span><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><span style=\"font-weight: normal;\">But they are expensive, bulky, and hard to find.\u00a0 They&#8217;re out there, but there are also a lot of so-called sinewave filters that actually only filter the current.\u00a0 (Such as the ones in the second image.)\u00a0 So you&#8217;ve got to know what you&#8217;re getting.\u00a0 Read the specs and look at the \u00abbefore and after\u00bb pictures carefully, and make sure that the product does what you think it does.<\/span><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><span style=\"font-weight: normal;\">Or, if you&#8217;re only worried about bearing damage, not long cable length, etc., you could just play it safe and use AEGIS rings.\u00a0 You know what you&#8217;re getting with them.<\/span><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Unlike most sinewave filters, AEGIS Shaft Grounding Rings come with a<span>\u00a0<\/span><a href=\"https:\/\/www.est-aegis.com\/product\/extended-warranty\/\" rel=\"noopener\">2-year extended warranty<\/a><span>\u00a0<\/span>against bearing fluting damage.\u00a0 No other form of shaft grounding offers a warranty like this.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">To learn more about AEGIS shaft grounding and best practices for electrical bearing protection,<span>\u00a0<\/span><a href=\"https:\/\/www.est-aegis.com\/resources\/training\/\" rel=\"noopener\">sign up for a training<\/a>.\u00a0 We offer monthly live training webinars, and \u2013 pandemic restrictions permitting \u2013 we can also visit your facility to review your exact application.<\/p>\n\n\n\n<div class=\"wp-block-buttons is-content-justification-center is-layout-flex wp-container-core-buttons-is-layout-fe48e5de wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/www.est-aegis.com\/resources\/training\/\">Sign Up For Training<\/a><\/div>\n<\/div>\n\n","protected":false},"excerpt":{"rendered":"<p>This time, we talk about electrical discharge detectors, the quality of drive output, and output filters.<\/p>\n","protected":false},"author":7,"featured_media":9774,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"content-type":"","_relevanssi_hide_post":"","_relevanssi_hide_content":"","_relevanssi_pin_for_all":"","_relevanssi_pin_keywords":"","_relevanssi_unpin_keywords":"","_relevanssi_related_keywords":"","_relevanssi_related_include_ids":"","_relevanssi_related_exclude_ids":"","_relevanssi_related_no_append":"","_relevanssi_related_not_related":"","_relevanssi_related_posts":"","_relevanssi_noindex_reason":"","footnotes":""},"categories":[1063],"tags":[],"class_list":["post-10162","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-qa-series"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO Pro 5.0.5.1 - aioseo.com -->\n\t<meta name=\"description\" content=\"This time, we talk about electrical discharge detectors, the quality of drive output, and output filters.\" \/>\n\t<meta name=\"robots\" content=\"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n\t<meta name=\"author\" content=\"AEGIS\"\/>\n\t<link rel=\"canonical\" href=\"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/\" \/>\n\t\t<meta name=\"generator\" content=\"All in One SEO Pro (AIOSEO) 5.0.5.1\" \/>\n\t\t<meta property=\"og:locale\" content=\"es_ES\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Electro Static Technology\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Discharge &amp; Sinewaves | Electrical Bearing Protection Q&amp;A Part 26\" \/>\n\t\t<meta property=\"og:description\" content=\"This time, we talk about electrical discharge detectors, the quality of drive output, and output filters.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/VandI.jpg\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/VandI.jpg\" \/>\n\t\t<meta property=\"og:image:width\" content=\"475\" \/>\n\t\t<meta property=\"og:image:height\" content=\"337\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2022-08-17T12:00:00+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-10-22T19:00:55+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:site\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Discharge &amp; Sinewaves | Electrical Bearing Protection Q&amp;A Part 26\" \/>\n\t\t<meta name=\"twitter:description\" content=\"This time, we talk about electrical discharge detectors, the quality of drive output, and output filters.\" \/>\n\t\t<meta name=\"twitter:creator\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/VandI.jpg\" \/>\n\t\t<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t\t<meta name=\"twitter:data1\" content=\"AEGIS\" \/>\n\t\t<meta name=\"twitter:label2\" content=\"Tiempo de lectura estimado\" \/>\n\t\t<meta name=\"twitter:data2\" content=\"4 minutos\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-26\\\/#article\",\"name\":\"Discharge & Sinewaves | Electrical Bearing Protection Q&A Part 26\",\"headline\":\"Electrical Bearing Protection Q&#038;A &#8211; Part 26\",\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/VandI.jpg\",\"width\":475,\"height\":337,\"caption\":\"#image_title\"},\"datePublished\":\"2022-08-17T08:00:00-04:00\",\"dateModified\":\"2026-10-22T15:00:55-04:00\",\"inLanguage\":\"es-ES\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-26\\\/#webpage\"},\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-26\\\/#webpage\"},\"articleSection\":\"Q&amp;A Series, Optional\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-26\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/qa-series\\\/#listItem\",\"name\":\"Q&amp;A Series\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/qa-series\\\/#listItem\",\"position\":2,\"name\":\"Q&amp;A Series\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/qa-series\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-26\\\/#listItem\",\"name\":\"Electrical Bearing Protection Q&#038;A &#8211; Part 26\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-26\\\/#listItem\",\"position\":3,\"name\":\"Electrical Bearing Protection Q&#038;A &#8211; Part 26\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/qa-series\\\/#listItem\",\"name\":\"Q&amp;A Series\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\",\"name\":\"Electro Static Technology\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/logo-aegis-1.svg\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-26\\\/#organizationLogo\",\"width\":244,\"height\":73,\"caption\":\"aegis logo\"},\"image\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-26\\\/#organizationLogo\"},\"sameAs\":[\"https:\\\/\\\/x.com\\\/AEGIS_rings\"],\"address\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#postaladdress\",\"@type\":\"PostalAddress\",\"streetAddress\":\"31 Winterbrook Road\",\"postalCode\":\"04256\",\"addressLocality\":\"Mechanic Falls\",\"addressRegion\":\"ME\",\"addressCountry\":\"US\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/\",\"name\":\"AEGIS\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-26\\\/#authorImage\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g\",\"width\":96,\"height\":96,\"caption\":\"AEGIS\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-26\\\/#webpage\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-26\\\/\",\"name\":\"Discharge & Sinewaves | Electrical Bearing Protection Q&A Part 26\",\"description\":\"This time, we talk about electrical discharge detectors, the quality of drive output, and output filters.\",\"inLanguage\":\"es-ES\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-26\\\/#breadcrumblist\"},\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"creator\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/VandI.jpg\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-26\\\/#mainImage\",\"width\":475,\"height\":337,\"caption\":\"#image_title\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-26\\\/#mainImage\"},\"datePublished\":\"2022-08-17T08:00:00-04:00\",\"dateModified\":\"2026-10-22T15:00:55-04:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#website\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"name\":\"Electro Static Technology\",\"inLanguage\":\"es-ES\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO Pro -->\r\n\t\t<title>Discharge &amp; Sinewaves | Electrical Bearing Protection Q&amp;A Part 26<\/title>\n\n","aioseo_head_json":{"title":"Discharge & Sinewaves | Electrical Bearing Protection Q&A Part 26","description":"This time, we talk about electrical discharge detectors, the quality of drive output, and output filters.","canonical_url":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/","robots":"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/#article","name":"Discharge & Sinewaves | Electrical Bearing Protection Q&A Part 26","headline":"Electrical Bearing Protection Q&#038;A &#8211; Part 26","author":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"publisher":{"@id":"https:\/\/www.est-aegis.com\/es\/#organization"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/VandI.jpg","width":475,"height":337,"caption":"#image_title"},"datePublished":"2022-08-17T08:00:00-04:00","dateModified":"2026-10-22T15:00:55-04:00","inLanguage":"es-ES","mainEntityOfPage":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/#webpage"},"isPartOf":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/#webpage"},"articleSection":"Q&amp;A Series, Optional"},{"@type":"BreadcrumbList","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/#listItem","position":1,"name":"Home","item":"https:\/\/www.est-aegis.com\/es\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/#listItem","name":"Q&amp;A Series"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/#listItem","position":2,"name":"Q&amp;A Series","item":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/#listItem","name":"Electrical Bearing Protection Q&#038;A &#8211; Part 26"},"previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/#listItem","position":3,"name":"Electrical Bearing Protection Q&#038;A &#8211; Part 26","previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/#listItem","name":"Q&amp;A Series"}}]},{"@type":"Organization","@id":"https:\/\/www.est-aegis.com\/es\/#organization","name":"Electro Static Technology","url":"https:\/\/www.est-aegis.com\/es\/","logo":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/logo-aegis-1.svg","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/#organizationLogo","width":244,"height":73,"caption":"aegis logo"},"image":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/#organizationLogo"},"sameAs":["https:\/\/x.com\/AEGIS_rings"],"address":{"@id":"https:\/\/www.est-aegis.com\/es\/#postaladdress","@type":"PostalAddress","streetAddress":"31 Winterbrook Road","postalCode":"04256","addressLocality":"Mechanic Falls","addressRegion":"ME","addressCountry":"US"}},{"@type":"Person","@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author","url":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/","name":"AEGIS","image":{"@type":"ImageObject","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/#authorImage","url":"https:\/\/secure.gravatar.com\/avatar\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g","width":96,"height":96,"caption":"AEGIS"}},{"@type":"WebPage","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/#webpage","url":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/","name":"Discharge & Sinewaves | Electrical Bearing Protection Q&A Part 26","description":"This time, we talk about electrical discharge detectors, the quality of drive output, and output filters.","inLanguage":"es-ES","isPartOf":{"@id":"https:\/\/www.est-aegis.com\/es\/#website"},"breadcrumb":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/#breadcrumblist"},"author":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"creator":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/VandI.jpg","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/#mainImage","width":475,"height":337,"caption":"#image_title"},"primaryImageOfPage":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/#mainImage"},"datePublished":"2022-08-17T08:00:00-04:00","dateModified":"2026-10-22T15:00:55-04:00"},{"@type":"WebSite","@id":"https:\/\/www.est-aegis.com\/es\/#website","url":"https:\/\/www.est-aegis.com\/es\/","name":"Electro Static Technology","inLanguage":"es-ES","publisher":{"@id":"https:\/\/www.est-aegis.com\/es\/#organization"}}]},"og:locale":"es_ES","og:site_name":"Electro Static Technology","og:type":"article","og:title":"Discharge &amp; Sinewaves | Electrical Bearing Protection Q&amp;A Part 26","og:description":"This time, we talk about electrical discharge detectors, the quality of drive output, and output filters.","og:url":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/","og:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/VandI.jpg","og:image:secure_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/VandI.jpg","og:image:width":475,"og:image:height":337,"article:published_time":"2022-08-17T12:00:00+00:00","article:modified_time":"2026-10-22T19:00:55+00:00","twitter:card":"summary_large_image","twitter:site":"@AEGIS_rings","twitter:title":"Discharge &amp; Sinewaves | Electrical Bearing Protection Q&amp;A Part 26","twitter:description":"This time, we talk about electrical discharge detectors, the quality of drive output, and output filters.","twitter:creator":"@AEGIS_rings","twitter:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/VandI.jpg","twitter:label1":"Escrito por","twitter:data1":"AEGIS","twitter:label2":"Tiempo de lectura estimado","twitter:data2":"4 minutos"},"aioseo_meta_data":{"post_id":"10162","title":"Discharge & Sinewaves | Electrical Bearing Protection Q&A Part 26","description":"This time, we talk about electrical discharge detectors, the quality of drive output, and output filters.","keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"seo_analyzer_scan_date":"2026-10-28 18:34:14","breadcrumb_settings":null,"limit_modified_date":false,"reviewed_by":null,"open_ai":null,"ai":null,"created":"2026-10-22 16:13:46","updated":"2026-11-16 21:27:11","focus_keyword":null,"additional_keywords":null,"truseo_locale":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/es\/\" title=\"Home\">Home<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/\" title=\"Q&amp;A Series\">Q&amp;A Series<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\tElectrical Bearing Protection Q&amp;A \u2013 Part 26\n<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/www.est-aegis.com\/es\/"},{"label":"Q&amp;A Series","link":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/"},{"label":"Electrical Bearing Protection Q&#038;A &#8211; Part 26","link":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-26\/"}],"jetpack_featured_media_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/VandI.jpg","_links":{"self":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/10162","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/comments?post=10162"}],"version-history":[{"count":3,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/10162\/revisions"}],"predecessor-version":[{"id":10697,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/10162\/revisions\/10697"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/media\/9774"}],"wp:attachment":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/media?parent=10162"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/categories?post=10162"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/tags?post=10162"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}