{"id":133,"date":"2018-03-02T12:45:31","date_gmt":"2018-03-02T17:45:31","guid":{"rendered":"https:\/\/www.est-aegis.com\/?p=133"},"modified":"2026-10-22T14:52:16","modified_gmt":"2026-10-22T18:52:16","slug":"one-way-measure-classify-bearing-currents","status":"publish","type":"post","link":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/","title":{"rendered":"There is more than one way to measure and classify bearing currents"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">In the article below we are re-publishing an article written by Gunnar Englund who invented the Beppe bearing analyzer.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u201cAll\u201d about EDM in bearings \u2013 on one page!<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">What is it?\u00a0 EDM (Electric Discharge Machining) or Bearing Current can be caused by external current sources \u2013 like welding with return path through bearing \u2013 or internal currents and voltages caused by frequency inverters with PWM voltage output.\u00a0 Induced shaft voltage is predominant in larger machines while capacitively coupled voltages are at work in smaller (HVAC, mostly) machines [as well as in larger machines].\u00a0 There is also the Frame Voltage, caused by high impedance in the protective earth wire.\u00a0 Frame Voltage is found in all motor sizes. It depends on the motor cable length and impedance.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><img loading=\"lazy\" decoding=\"async\" class=\"alignright\" alt=\"EDM-breakdown\" height=\"133\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/EDM-breakdown.jpg\" width=\"200\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">What happens?\u00a0 Independent on how the voltage across the bearing is produced, the discharge current always looks the same. A break-down of the oil film between balls\/rollers and race-way discharges rotor capacitance and the discharge is over in .02 &#8211; .05 microseconds.\u00a0 Discharging the rotor capacitance in such a short time means a very high peak current \u2013 often 10 \u2013 100 amperes.\u00a0 This high current heats the steel locally so that a small amount is vaporized and a small crater with diameter .5 \u2013 1 micrometer is formed.\u00a0 After several millions of such craters have been formed, the surface hardness is reduced to such an extent that the balls start to bounce \u2013 like car wheels on a dirt road \u2013 and the well known wash-board pattern is formed.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><img loading=\"lazy\" decoding=\"async\" alt=\"\" class=\"alignright wp-image-1045 size-medium\" height=\"152\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/EDM-pit-300x228-1.jpg\" width=\"200\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Can EDM be measured?\u00a0 If you look at the motor shaft voltage with an oscilloscope, you will see a mishmash of highly irregular signals.\u00a0 Some with low values and some voltage peaks \u2013 between 15 and 20 volts,\u00a0 sometimes more.\u00a0 It is possible to \u201csort out\u201d the extremely fast edges caused by the EDM break-downs, classify them in energy levels and totalize the number of PPS in each level.\u00a0 That does give a number as to how critical the EDM activity in the bearing is and thence predict if the motor bearings will be destroyed by EDM or not.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It can be done with a fast digital oscilloscope.\u00a0 One that, in extreme real time, calculates voltage derivative and trigs and counts when a certain value is exceeded.\u00a0 Such oscilloscopes are rare \u2013 and costly.\u00a0 That is why the GKE Bearing Predictor (Beppe) has been designed and put on market.\u00a0 It is a small \u201cExpert System\u201d in a hand-held box and can be used with a minimum of training.\u00a0 The display \u201cspeaks\u201d one of four selectable languages and is self-instructing.\u00a0 Just connect and answer a couple of questions \u2013 the Beppe does the rest.<img loading=\"lazy\" decoding=\"async\" alt=\"\" class=\"alignright wp-image-1046 size-medium\" height=\"154\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/fluted-bearing-300x231-1.jpg\" width=\"200\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">100 nanoseconds, or faster, edges (1\/10th of a microsecond) are counted and accumulated in three counters for High, Medium and Low energy. Data are stored and can be transferred to PC memory via USB.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><img loading=\"lazy\" decoding=\"async\" alt=\"\" class=\"wp-image-1047 size-medium\" height=\"300\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/Beppe-analyser-251x300-1.jpg\" width=\"251\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Electro Static Technology, the manufacturer of the AEGIS Shaft Grounding Ring, has had the privilege of meeting and discussing bearing currents with Gunnar Englund.\u00a0 The information in the article above is his own and any questions should be referred directly to him.<\/p>\n\n","protected":false},"excerpt":{"rendered":"<p>There is more than one way to measure and classify bearing currents<\/p>\n","protected":false},"author":7,"featured_media":8775,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"content-type":"","_relevanssi_hide_post":"","_relevanssi_hide_content":"","_relevanssi_pin_for_all":"","_relevanssi_pin_keywords":"","_relevanssi_unpin_keywords":"","_relevanssi_related_keywords":"","_relevanssi_related_include_ids":"","_relevanssi_related_exclude_ids":"","_relevanssi_related_no_append":"","_relevanssi_related_not_related":"","_relevanssi_related_posts":"","_relevanssi_noindex_reason":"","footnotes":""},"categories":[1065],"tags":[],"class_list":["post-133","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-bearing-damage-basics"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO Pro 5.0.5.1 - aioseo.com -->\n\t<meta name=\"description\" content=\"There is more than one way to measure and classify bearing currents\" \/>\n\t<meta name=\"robots\" content=\"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n\t<meta name=\"author\" content=\"AEGIS\"\/>\n\t<link rel=\"canonical\" href=\"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/\" \/>\n\t\t<meta name=\"generator\" content=\"All in One SEO Pro (AIOSEO) 5.0.5.1\" \/>\n\t\t<meta property=\"og:locale\" content=\"es_ES\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Electro Static Technology\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"There is more than one way to measure and classify bearing currents\" \/>\n\t\t<meta property=\"og:description\" content=\"There is more than one way to measure and classify bearing currents\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/EDM-breakdown.jpg\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/EDM-breakdown.jpg\" \/>\n\t\t<meta property=\"og:image:width\" content=\"233\" \/>\n\t\t<meta property=\"og:image:height\" content=\"155\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2018-03-02T17:45:31+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-10-22T18:52:16+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:site\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:title\" content=\"There is more than one way to measure and classify bearing currents\" \/>\n\t\t<meta name=\"twitter:description\" content=\"There is more than one way to measure and classify bearing currents\" \/>\n\t\t<meta name=\"twitter:creator\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/EDM-breakdown.jpg\" \/>\n\t\t<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t\t<meta name=\"twitter:data1\" content=\"AEGIS\" \/>\n\t\t<meta name=\"twitter:label2\" content=\"Tiempo de lectura estimado\" \/>\n\t\t<meta name=\"twitter:data2\" content=\"3 minutos\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/one-way-measure-classify-bearing-currents\\\/#article\",\"name\":\"There is more than one way to measure and classify bearing currents\",\"headline\":\"There is more than one way to measure and classify bearing currents\",\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/EDM-breakdown.jpg\",\"width\":233,\"height\":155,\"caption\":\"#image_title\"},\"datePublished\":\"2018-03-02T12:45:31-05:00\",\"dateModified\":\"2026-10-22T14:52:16-04:00\",\"inLanguage\":\"es-ES\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/one-way-measure-classify-bearing-currents\\\/#webpage\"},\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/one-way-measure-classify-bearing-currents\\\/#webpage\"},\"articleSection\":\"Bearing Damage Basics, Optional\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/one-way-measure-classify-bearing-currents\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/bearing-damage-basics\\\/#listItem\",\"name\":\"Bearing Damage Basics\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/bearing-damage-basics\\\/#listItem\",\"position\":2,\"name\":\"Bearing Damage Basics\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/bearing-damage-basics\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/one-way-measure-classify-bearing-currents\\\/#listItem\",\"name\":\"There is more than one way to measure and classify bearing currents\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/one-way-measure-classify-bearing-currents\\\/#listItem\",\"position\":3,\"name\":\"There is more than one way to measure and classify bearing currents\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/bearing-damage-basics\\\/#listItem\",\"name\":\"Bearing Damage Basics\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\",\"name\":\"Electro Static Technology\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/logo-aegis-1.svg\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/one-way-measure-classify-bearing-currents\\\/#organizationLogo\",\"width\":244,\"height\":73,\"caption\":\"aegis logo\"},\"image\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/one-way-measure-classify-bearing-currents\\\/#organizationLogo\"},\"sameAs\":[\"https:\\\/\\\/x.com\\\/AEGIS_rings\"],\"address\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#postaladdress\",\"@type\":\"PostalAddress\",\"streetAddress\":\"31 Winterbrook Road\",\"postalCode\":\"04256\",\"addressLocality\":\"Mechanic Falls\",\"addressRegion\":\"ME\",\"addressCountry\":\"US\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/\",\"name\":\"AEGIS\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/one-way-measure-classify-bearing-currents\\\/#authorImage\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g\",\"width\":96,\"height\":96,\"caption\":\"AEGIS\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/one-way-measure-classify-bearing-currents\\\/#webpage\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/one-way-measure-classify-bearing-currents\\\/\",\"name\":\"There is more than one way to measure and classify bearing currents\",\"description\":\"There is more than one way to measure and classify bearing currents\",\"inLanguage\":\"es-ES\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/one-way-measure-classify-bearing-currents\\\/#breadcrumblist\"},\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"creator\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/EDM-breakdown.jpg\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/one-way-measure-classify-bearing-currents\\\/#mainImage\",\"width\":233,\"height\":155,\"caption\":\"#image_title\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/one-way-measure-classify-bearing-currents\\\/#mainImage\"},\"datePublished\":\"2018-03-02T12:45:31-05:00\",\"dateModified\":\"2026-10-22T14:52:16-04:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#website\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"name\":\"Electro Static Technology\",\"inLanguage\":\"es-ES\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO Pro -->\r\n\t\t<title>There is more than one way to measure and classify bearing currents<\/title>\n\n","aioseo_head_json":{"title":"There is more than one way to measure and classify bearing currents","description":"There is more than one way to measure and classify bearing currents","canonical_url":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/","robots":"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/#article","name":"There is more than one way to measure and classify bearing currents","headline":"There is more than one way to measure and classify bearing currents","author":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"publisher":{"@id":"https:\/\/www.est-aegis.com\/es\/#organization"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/EDM-breakdown.jpg","width":233,"height":155,"caption":"#image_title"},"datePublished":"2018-03-02T12:45:31-05:00","dateModified":"2026-10-22T14:52:16-04:00","inLanguage":"es-ES","mainEntityOfPage":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/#webpage"},"isPartOf":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/#webpage"},"articleSection":"Bearing Damage Basics, Optional"},{"@type":"BreadcrumbList","@id":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/#listItem","position":1,"name":"Home","item":"https:\/\/www.est-aegis.com\/es\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/bearing-damage-basics\/#listItem","name":"Bearing Damage Basics"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/bearing-damage-basics\/#listItem","position":2,"name":"Bearing Damage Basics","item":"https:\/\/www.est-aegis.com\/es\/blog\/category\/bearing-damage-basics\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/#listItem","name":"There is more than one way to measure and classify bearing currents"},"previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/#listItem","position":3,"name":"There is more than one way to measure and classify bearing currents","previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/bearing-damage-basics\/#listItem","name":"Bearing Damage Basics"}}]},{"@type":"Organization","@id":"https:\/\/www.est-aegis.com\/es\/#organization","name":"Electro Static Technology","url":"https:\/\/www.est-aegis.com\/es\/","logo":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/logo-aegis-1.svg","@id":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/#organizationLogo","width":244,"height":73,"caption":"aegis logo"},"image":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/#organizationLogo"},"sameAs":["https:\/\/x.com\/AEGIS_rings"],"address":{"@id":"https:\/\/www.est-aegis.com\/es\/#postaladdress","@type":"PostalAddress","streetAddress":"31 Winterbrook Road","postalCode":"04256","addressLocality":"Mechanic Falls","addressRegion":"ME","addressCountry":"US"}},{"@type":"Person","@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author","url":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/","name":"AEGIS","image":{"@type":"ImageObject","@id":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/#authorImage","url":"https:\/\/secure.gravatar.com\/avatar\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g","width":96,"height":96,"caption":"AEGIS"}},{"@type":"WebPage","@id":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/#webpage","url":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/","name":"There is more than one way to measure and classify bearing currents","description":"There is more than one way to measure and classify bearing currents","inLanguage":"es-ES","isPartOf":{"@id":"https:\/\/www.est-aegis.com\/es\/#website"},"breadcrumb":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/#breadcrumblist"},"author":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"creator":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/EDM-breakdown.jpg","@id":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/#mainImage","width":233,"height":155,"caption":"#image_title"},"primaryImageOfPage":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/#mainImage"},"datePublished":"2018-03-02T12:45:31-05:00","dateModified":"2026-10-22T14:52:16-04:00"},{"@type":"WebSite","@id":"https:\/\/www.est-aegis.com\/es\/#website","url":"https:\/\/www.est-aegis.com\/es\/","name":"Electro Static Technology","inLanguage":"es-ES","publisher":{"@id":"https:\/\/www.est-aegis.com\/es\/#organization"}}]},"og:locale":"es_ES","og:site_name":"Electro Static Technology","og:type":"article","og:title":"There is more than one way to measure and classify bearing currents","og:description":"There is more than one way to measure and classify bearing currents","og:url":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/","og:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/EDM-breakdown.jpg","og:image:secure_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/EDM-breakdown.jpg","og:image:width":233,"og:image:height":155,"article:published_time":"2018-03-02T17:45:31+00:00","article:modified_time":"2026-10-22T18:52:16+00:00","twitter:card":"summary_large_image","twitter:site":"@AEGIS_rings","twitter:title":"There is more than one way to measure and classify bearing currents","twitter:description":"There is more than one way to measure and classify bearing currents","twitter:creator":"@AEGIS_rings","twitter:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/EDM-breakdown.jpg","twitter:label1":"Escrito por","twitter:data1":"AEGIS","twitter:label2":"Tiempo de lectura estimado","twitter:data2":"3 minutos"},"aioseo_meta_data":{"post_id":"133","title":"There is more than one way to measure and classify bearing currents","description":"There is more than one way to measure and classify bearing currents","keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"seo_analyzer_scan_date":"2026-11-04 18:41:41","breadcrumb_settings":null,"limit_modified_date":false,"reviewed_by":null,"open_ai":null,"ai":null,"created":"2026-10-22 16:14:02","updated":"2026-11-16 20:24:53","focus_keyword":null,"additional_keywords":null,"truseo_locale":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/es\/\" title=\"Home\">Home<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/es\/blog\/category\/bearing-damage-basics\/\" title=\"Bearing Damage Basics\">Bearing Damage Basics<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\tThere is more than one way to measure and classify bearing currents\n<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/www.est-aegis.com\/es\/"},{"label":"Bearing Damage Basics","link":"https:\/\/www.est-aegis.com\/es\/blog\/category\/bearing-damage-basics\/"},{"label":"There is more than one way to measure and classify bearing currents","link":"https:\/\/www.est-aegis.com\/es\/blog\/one-way-measure-classify-bearing-currents\/"}],"jetpack_featured_media_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/EDM-breakdown.jpg","_links":{"self":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/133","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/comments?post=133"}],"version-history":[{"count":2,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/133\/revisions"}],"predecessor-version":[{"id":10600,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/133\/revisions\/10600"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/media\/8775"}],"wp:attachment":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/media?parent=133"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/categories?post=133"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/tags?post=133"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}