{"id":78,"date":"2023-07-25T09:15:00","date_gmt":"2023-07-25T13:15:00","guid":{"rendered":"https:\/\/www.est-aegis.com\/?p=78"},"modified":"2026-10-22T15:00:49","modified_gmt":"2026-10-22T19:00:49","slug":"electrical-bearing-protection-qa-part-32","status":"publish","type":"post","link":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/","title":{"rendered":"Electrical Bearing Protection Q&#038;A Part 32"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Part 32 in a series of questions and answers from our Q&amp;A <a href=\"https:\/\/www.est-aegis.com\/training\">webinars<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Q:\u00a0 Is there a spark risk for a dusty sawmill application?<img loading=\"lazy\" decoding=\"async\" class=\"alignright\" alt=\"sawdust\" height=\"385\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/sawdust.jpg\" width=\"300\"><\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>A:\u00a0<\/strong> An AEGIS<sup>\u00ae<\/sup> ring mounted on the outside of the motor could increase the risk.\u00a0 It would probably be safe, but \u00abprobably safe\u00bb isn&#8217;t really safe enough.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Instead of mounting outside, it would be best to install the ring inside the motor.\u00a0 Not only for spark risk, but to avoid fouling the ring&#8217;s fibers.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Internal installation is one of AEGIS rings&#8217; biggest advantages.\u00a0 Other shaft grounding devices need to be adjusted or replaced; AEGIS is rather a \u00abset &amp; forget\u00bb solution.\u00a0 It can be installed in a motor &amp; then not worried about.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Q:\u00a0 In a harsh environment with oil or grease on the shaft, after a while the AEGIS ring gets dirty.\u00a0 How do we get the grease off?<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>A:<\/strong>\u00a0 It depends how much contamination we&#8217;re talking about.\u00a0 The ring would fail if it were flooded, with grease or water or other liquid.\u00a0 In these applications, we highly recommend installing inside the motor.\u00a0 Motor OEMs install rings inside their motors, and motor repair shops also often install rings inside.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">As for cleaning:\u00a0 the conductive microfibers can be cleaned with solvents like alcohol or acetone.\u00a0 Some people use gasoline, though we don&#8217;t recommend that.\u00a0 Typically, if it&#8217;s gotten to the point where you need to clean the ring, we really suggest moving it to inside of the motor.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Other options include external installation with a rubber O-ring on the shaft to screen the fibers from grease.\u00a0 There are also <a href=\"https:\/\/est-aegis.com\/oems-seals.php\">bearing isolators with shaft grounding rings inside<\/a>, made by Garlock, Flowserve, and AESSeal.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Q:\u00a0 What is the life expectancy of the SGR?<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>A:<\/strong>\u00a0 The ring&#8217;s lifetime is based on the L10 lifetime of a standard rolling element bearing, which is 100k hours for with a shaft of 6&#8243; or less.\u00a0 That&#8217;s the ring&#8217;s minimum lifetime; lab tests indicate more like 200k hours.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But this all depends on the condition of the shaft surface, and on its size.\u00a0 The larger the shaft, the higher the surface velocity.\u00a0 (The surface of a 6&#8243; shaft moves faster than the surface of a 3&#8243; shaft if they&#8217;re both spinning at the same rpm.)<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">We visited a power plant with 17.5&#8243; shaft at 3600 rpm.\u00a0 In that case, the total distance rate estimated a lifetime of 5.5 years.\u00a0 They were happy to hear that, since they had been using springloaded carbon brushes that only lasted 2 weeks.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Q:\u00a0 What about Class 1 Div 2 environments?<\/strong><img loading=\"lazy\" decoding=\"async\" class=\"alignright\" alt=\"class1div2\" height=\"300\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/class1div2.gif\" width=\"300\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>A:<\/strong>\u00a0 All shaft grounding devices are classified as arcing devices.\u00a0 Obviously electrical arcing in a potentially explosive atmosphere is not allowed.\u00a0 Today though, there are motor manufacturers (<a href=\"https:\/\/www.est-aegis.com\/oem\/Marathon\/Marathon_XPAEGIS_2014.pdf\" rel=\"noopener noreferrer\" target=\"_blank\">Marathon<\/a> (Regal), <a href=\"https:\/\/static.weg.net\/medias\/downloadcenter\/h31\/hc7\/WEG-02-2019-standard-stock-catalog-super-premium-severe-duty-explosion-proof-motors-us100-brochure-english.pdf#page=37\" rel=\"noopener noreferrer\" target=\"_blank\">WEG<\/a>, &amp; Baldor (ABB)) who offer AEGIS rings installed <i>inside<\/i> the motor for explosion proof motors for Class 1, Div 1 environments.\u00a0 There are also about 30 different <a href=\"https:\/\/www.est-aegis.com\/ULInstallers.php\">motor repair companies<\/a> that can install an AEGIS ring in this way, and then nameplate it as Class 1 Div 1-capable.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">As for Class 1, Div 2:\u00a0 You can use an XP motor here, though you may not want to go full-on XP.\u00a0 Usually you would use an IEEE-841 motor, a Class 1 Div 2-capable motor.\u00a0 Shaft grounding is allowed in these environments, provided that certain calculations have been done to show safety.\u00a0 You can get the fuller story in <a href=\"\/changing-standards-shaft-grounding-in-ieee-841-motors-hazardous-locations?hsLang=en-us\" rel=\"noopener\">this post<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Q:\u00a0 If you&#8217;re using a bearing isolator without an SGR, where does the shaft current go?<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>A:<\/strong>\u00a0 Through the bearings.\u00a0 Bearing isolators prevent contamination from getting into the bearing, but that&#8217;s all they do.\u00a0 They don&#8217;t protect the bearings from electrical damage, <i>unless<\/i> they have an integrated AEGIS ring.\u00a0 Again, there are <a href=\"https:\/\/www.est-aegis.com\/oems-seals.php\">three seal companies<\/a> that offer seals with integrated shaft grounding rings:\u00a0 Garlock, Flowserve, &amp; AESSeal.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">AEGIS Rings also come with a <a href=\"https:\/\/www.est-aegis.com\/product\/extended-warranty\/\" rel=\"noopener\" target=\"_blank\">2-year extended warranty<\/a> against bearing fluting damage. No other form of protection against VFD-caused bearing damage offers a warranty like this.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">To learn more about AEGIS shaft grounding and best practices for electrical bearing protection, <a href=\"https:\/\/www.est-aegis.com\/resources\/training\/\" rel=\"noopener\" target=\"_blank\">sign up for a training<\/a>. We offer monthly live training webinars, and &#8211; pandemic restrictions permitting &#8211; we can also visit your facility to review your exact application.<\/p>\n\n\n\n<div class=\"wp-block-buttons is-content-justification-center is-layout-flex wp-container-core-buttons-is-layout-fe48e5de wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/www.est-aegis.com\/resources\/training\/\">Sign Up For Training<\/a><\/div>\n<\/div>\n\n","protected":false},"excerpt":{"rendered":"<p>This post is part 32 of our Electrical Bearing Protection questions and answers series.<\/p>\n","protected":false},"author":7,"featured_media":9541,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"content-type":"","_relevanssi_hide_post":"","_relevanssi_hide_content":"","_relevanssi_pin_for_all":"","_relevanssi_pin_keywords":"","_relevanssi_unpin_keywords":"","_relevanssi_related_keywords":"","_relevanssi_related_include_ids":"","_relevanssi_related_exclude_ids":"","_relevanssi_related_no_append":"","_relevanssi_related_not_related":"","_relevanssi_related_posts":"","_relevanssi_noindex_reason":"","footnotes":""},"categories":[1063],"tags":[],"class_list":["post-78","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-qa-series"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO Pro 5.0.5.1 - aioseo.com -->\n\t<meta name=\"description\" content=\"This post is part 32 of our Electrical Bearing Protection questions and answers series.\" \/>\n\t<meta name=\"robots\" content=\"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n\t<meta name=\"author\" content=\"AEGIS\"\/>\n\t<link rel=\"canonical\" href=\"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/\" \/>\n\t\t<meta name=\"generator\" content=\"All in One SEO Pro (AIOSEO) 5.0.5.1\" \/>\n\t\t<meta property=\"og:locale\" content=\"es_ES\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Electro Static Technology\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Electrical Bearing Protection Questions and Answers Part 32\" \/>\n\t\t<meta property=\"og:description\" content=\"This post is part 32 of our Electrical Bearing Protection questions and answers series.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/sawdust-e1596820238486-227x300-1.jpg\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/sawdust-e1596820238486-227x300-1.jpg\" \/>\n\t\t<meta property=\"og:image:width\" content=\"227\" \/>\n\t\t<meta property=\"og:image:height\" content=\"300\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2023-07-25T13:15:00+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-10-22T19:00:49+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:site\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Electrical Bearing Protection Questions and Answers Part 32\" \/>\n\t\t<meta name=\"twitter:description\" content=\"This post is part 32 of our Electrical Bearing Protection questions and answers series.\" \/>\n\t\t<meta name=\"twitter:creator\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/sawdust-e1596820238486-227x300-1.jpg\" \/>\n\t\t<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t\t<meta name=\"twitter:data1\" content=\"AEGIS\" \/>\n\t\t<meta name=\"twitter:label2\" content=\"Tiempo de lectura estimado\" \/>\n\t\t<meta name=\"twitter:data2\" content=\"3 minutos\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-32\\\/#article\",\"name\":\"Electrical Bearing Protection Questions and Answers Part 32\",\"headline\":\"Electrical Bearing Protection Q&#038;A Part 32\",\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/sawdust-e1596820238486-227x300-1.jpg\",\"width\":227,\"height\":300,\"caption\":\"#image_title\"},\"datePublished\":\"2023-07-25T09:15:00-04:00\",\"dateModified\":\"2026-10-22T15:00:49-04:00\",\"inLanguage\":\"es-ES\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-32\\\/#webpage\"},\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-32\\\/#webpage\"},\"articleSection\":\"Q&amp;A Series, Optional\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-32\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/qa-series\\\/#listItem\",\"name\":\"Q&amp;A Series\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/qa-series\\\/#listItem\",\"position\":2,\"name\":\"Q&amp;A Series\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/qa-series\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-32\\\/#listItem\",\"name\":\"Electrical Bearing Protection Q&#038;A Part 32\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-32\\\/#listItem\",\"position\":3,\"name\":\"Electrical Bearing Protection Q&#038;A Part 32\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/qa-series\\\/#listItem\",\"name\":\"Q&amp;A Series\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\",\"name\":\"Electro Static Technology\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/logo-aegis-1.svg\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-32\\\/#organizationLogo\",\"width\":244,\"height\":73,\"caption\":\"aegis logo\"},\"image\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-32\\\/#organizationLogo\"},\"sameAs\":[\"https:\\\/\\\/x.com\\\/AEGIS_rings\"],\"address\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#postaladdress\",\"@type\":\"PostalAddress\",\"streetAddress\":\"31 Winterbrook Road\",\"postalCode\":\"04256\",\"addressLocality\":\"Mechanic Falls\",\"addressRegion\":\"ME\",\"addressCountry\":\"US\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/\",\"name\":\"AEGIS\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-32\\\/#authorImage\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g\",\"width\":96,\"height\":96,\"caption\":\"AEGIS\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-32\\\/#webpage\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-32\\\/\",\"name\":\"Electrical Bearing Protection Questions and Answers Part 32\",\"description\":\"This post is part 32 of our Electrical Bearing Protection questions and answers series.\",\"inLanguage\":\"es-ES\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-32\\\/#breadcrumblist\"},\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"creator\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/sawdust-e1596820238486-227x300-1.jpg\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-32\\\/#mainImage\",\"width\":227,\"height\":300,\"caption\":\"#image_title\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-32\\\/#mainImage\"},\"datePublished\":\"2023-07-25T09:15:00-04:00\",\"dateModified\":\"2026-10-22T15:00:49-04:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#website\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"name\":\"Electro Static Technology\",\"inLanguage\":\"es-ES\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO Pro -->\r\n\t\t<title>Electrical Bearing Protection Questions and Answers Part 32<\/title>\n\n","aioseo_head_json":{"title":"Electrical Bearing Protection Questions and Answers Part 32","description":"This post is part 32 of our Electrical Bearing Protection questions and answers series.","canonical_url":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/","robots":"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/#article","name":"Electrical Bearing Protection Questions and Answers Part 32","headline":"Electrical Bearing Protection Q&#038;A Part 32","author":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"publisher":{"@id":"https:\/\/www.est-aegis.com\/es\/#organization"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/sawdust-e1596820238486-227x300-1.jpg","width":227,"height":300,"caption":"#image_title"},"datePublished":"2023-07-25T09:15:00-04:00","dateModified":"2026-10-22T15:00:49-04:00","inLanguage":"es-ES","mainEntityOfPage":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/#webpage"},"isPartOf":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/#webpage"},"articleSection":"Q&amp;A Series, Optional"},{"@type":"BreadcrumbList","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/#listItem","position":1,"name":"Home","item":"https:\/\/www.est-aegis.com\/es\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/#listItem","name":"Q&amp;A Series"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/#listItem","position":2,"name":"Q&amp;A Series","item":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/#listItem","name":"Electrical Bearing Protection Q&#038;A Part 32"},"previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/#listItem","position":3,"name":"Electrical Bearing Protection Q&#038;A Part 32","previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/#listItem","name":"Q&amp;A Series"}}]},{"@type":"Organization","@id":"https:\/\/www.est-aegis.com\/es\/#organization","name":"Electro Static Technology","url":"https:\/\/www.est-aegis.com\/es\/","logo":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/logo-aegis-1.svg","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/#organizationLogo","width":244,"height":73,"caption":"aegis logo"},"image":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/#organizationLogo"},"sameAs":["https:\/\/x.com\/AEGIS_rings"],"address":{"@id":"https:\/\/www.est-aegis.com\/es\/#postaladdress","@type":"PostalAddress","streetAddress":"31 Winterbrook Road","postalCode":"04256","addressLocality":"Mechanic Falls","addressRegion":"ME","addressCountry":"US"}},{"@type":"Person","@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author","url":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/","name":"AEGIS","image":{"@type":"ImageObject","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/#authorImage","url":"https:\/\/secure.gravatar.com\/avatar\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g","width":96,"height":96,"caption":"AEGIS"}},{"@type":"WebPage","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/#webpage","url":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/","name":"Electrical Bearing Protection Questions and Answers Part 32","description":"This post is part 32 of our Electrical Bearing Protection questions and answers series.","inLanguage":"es-ES","isPartOf":{"@id":"https:\/\/www.est-aegis.com\/es\/#website"},"breadcrumb":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/#breadcrumblist"},"author":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"creator":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/sawdust-e1596820238486-227x300-1.jpg","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/#mainImage","width":227,"height":300,"caption":"#image_title"},"primaryImageOfPage":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/#mainImage"},"datePublished":"2023-07-25T09:15:00-04:00","dateModified":"2026-10-22T15:00:49-04:00"},{"@type":"WebSite","@id":"https:\/\/www.est-aegis.com\/es\/#website","url":"https:\/\/www.est-aegis.com\/es\/","name":"Electro Static Technology","inLanguage":"es-ES","publisher":{"@id":"https:\/\/www.est-aegis.com\/es\/#organization"}}]},"og:locale":"es_ES","og:site_name":"Electro Static Technology","og:type":"article","og:title":"Electrical Bearing Protection Questions and Answers Part 32","og:description":"This post is part 32 of our Electrical Bearing Protection questions and answers series.","og:url":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/","og:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/sawdust-e1596820238486-227x300-1.jpg","og:image:secure_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/sawdust-e1596820238486-227x300-1.jpg","og:image:width":227,"og:image:height":300,"article:published_time":"2023-07-25T13:15:00+00:00","article:modified_time":"2026-10-22T19:00:49+00:00","twitter:card":"summary_large_image","twitter:site":"@AEGIS_rings","twitter:title":"Electrical Bearing Protection Questions and Answers Part 32","twitter:description":"This post is part 32 of our Electrical Bearing Protection questions and answers series.","twitter:creator":"@AEGIS_rings","twitter:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/sawdust-e1596820238486-227x300-1.jpg","twitter:label1":"Escrito por","twitter:data1":"AEGIS","twitter:label2":"Tiempo de lectura estimado","twitter:data2":"3 minutos"},"aioseo_meta_data":{"post_id":"78","title":"Electrical Bearing Protection Questions and Answers Part 32","description":"This post is part 32 of our Electrical Bearing Protection questions and answers series.","keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"seo_analyzer_scan_date":"2026-10-28 18:25:29","breadcrumb_settings":null,"limit_modified_date":false,"reviewed_by":null,"open_ai":null,"ai":null,"created":"2026-10-22 16:13:48","updated":"2026-11-16 20:18:32","focus_keyword":null,"additional_keywords":null,"truseo_locale":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/es\/\" title=\"Home\">Home<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/\" title=\"Q&amp;A Series\">Q&amp;A Series<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\tElectrical Bearing Protection Q&amp;A Part 32\n<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/www.est-aegis.com\/es\/"},{"label":"Q&amp;A Series","link":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/"},{"label":"Electrical Bearing Protection Q&#038;A Part 32","link":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-32\/"}],"jetpack_featured_media_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/sawdust-e1596820238486-227x300-1.jpg","_links":{"self":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/78","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/comments?post=78"}],"version-history":[{"count":3,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/78\/revisions"}],"predecessor-version":[{"id":10677,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/78\/revisions\/10677"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/media\/9541"}],"wp:attachment":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/media?parent=78"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/categories?post=78"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/tags?post=78"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}