{"id":83,"date":"2021-02-02T10:57:51","date_gmt":"2021-02-02T15:57:51","guid":{"rendered":"https:\/\/www.est-aegis.com\/?p=83"},"modified":"2026-10-22T14:51:52","modified_gmt":"2026-10-22T18:51:52","slug":"electrical-bearing-protection-qa-part-8","status":"publish","type":"post","link":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/","title":{"rendered":"Electrical Bearing Protection Q&#038;A Part 8"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Part 8 in a series of questions and answers from our Q&amp;A <a href=\"https:\/\/www.est-aegis.com\/resources\/training\/\" rel=\"noopener\" target=\"_blank\">webinars<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Q1.\u00a0 Are there any arcing or sparking concerns with AEGIS<sup>\u00ae<\/sup> Rings?<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A1.\u00a0 Yes, arcing or sparking may occur.\u00a0 Because the shaft voltage is very low when it discharges through the ring, these will be very low-energy arcs, but they may still be a problem in Class I Div 1\/Div 2 environments.\u00a0 Underwriters Laboratory (UL) has an approved set of procedures for installing an AEGIS ring inside an<img loading=\"lazy\" decoding=\"async\" class=\"alignright\" alt=\"wiki-arc\" height=\"179\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/wiki-arc.jpg\" width=\"300\"> explosion proof motor for Class I Div 1 environments.\u00a0 Some motor manufacturers, like Marathon and WEG, offer XP motors with AEGIS.\u00a0 And there are several motor repair companies that are approved to install AEGIS in an XP motor.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">To date, NEMA &amp; IEEE have not approved any shaft grounding device for use in Class I Div 2 environments.\u00a0 (Using an XP motor would usually be considered overkill.)\u00a0 But an IEEE task group has been researching this, and we are confident that it will change in the near future.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Q2.\u00a0 The AEGIS Handbook talks about measuring shaft voltage on ac motors.\u00a0 Does this measurement also work for dc motors?<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A2.\u00a0 Yes, the testing works exactly the same.\u00a0 The waveforms may look different, because dc drives may use a different modulation scheme.\u00a0 And the shaft voltage is often lower on dc machines than ac induction motors, but the risk of electrical bearing damage is still there.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Q3. How do AEGIS rings compare to common mode cores on large machines?<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A3. In ac motors over 100 hp, they work well together.\u00a0 AEGIS rings protect against shaft voltage discharge through the bearings.\u00a0 This is caused by the <em>common mode voltage<\/em> of the drive&#8217;s output.\u00a0 Shaft voltage discharge is a problem is all ac induction motors on drives, regardless of size.\u00a0 There are filters that can reduce common mode voltage, but they are expensive and rarely used.<img loading=\"lazy\" decoding=\"async\" class=\"alignright\" alt=\"Toroid_core\" height=\"189\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/Toroid_core.png\" width=\"252\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Common mode cores, or inductive absorbers, filter out much of the <em>common mode current<\/em> in the drive&#8217;s output.\u00a0 Common mode current causes rotor ground current in poorly-grounded motors, and high frequency circulating current in motors over 100 hp (75 kW).\u00a0 So these cores protect against those two modes of damage, but <strong>cores do not protect against shaft voltage discharge, the major source of damage in small well-grounded motors<\/strong>.\u00a0 In fact, research suggests that installing improperly sized cores can made shaft voltage discharge damage worse.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In larger motors, we recommend installing an AEGIS Ring at one end, and some type of insulated bearing at the opposite end.\u00a0 The AEGIS Ring discharges shaft voltage, and the insulated bearing blocks circulating current.\u00a0 This is all the protection a well-grounded large motor needs.\u00a0 If the motor frame is not well grounded, you can use high frequency grounding straps to protect against rotor ground current.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Common mode cores can filter up to 65% of common mode current.\u00a0 Although we recommend one grounding ring and an insulated bearing, you could probably use one AEGIS Ring and appropriately sized cores.\u00a0 The ring would protect against discharge current, and the cores would decrease circulating and rotor ground current.\u00a0 Would cores decrease the common mode current <em>enough<\/em>, so there was no damage from circulating and rotor ground current?\u00a0 Maybe, maybe not.\u00a0 AEGIS used with cores may not be as good as using AEGIS and an insulated bearing, but it&#8217;s definitely better than nothing.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Q4.\u00a0 Do servo motors have problems with bearing currents?<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A4.\u00a0 Yes and no.\u00a0 We&#8217;ve had multiple servo users report bearing fluting, but to date, no servo manufacturers have acknowledged this problem.\u00a0 Another challenge is that with servo motors, there&#8217;s no empty space: the case is filled with motor.\u00a0 But we do know of motor repair companies who install AEGIS rings on the outside of servo motors.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/est-aegis.com\/registerprod.php\"><img loading=\"lazy\" decoding=\"async\" alt=\"\" class=\"alignleft wp-image-1654\" height=\"40\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/W-Dec-22-2021-03-25-24-08-PM.png\" width=\"40\"><\/a><br>AEGIS Rings also come with a <a href=\"https:\/\/www.est-aegis.com\/product\/extended-warranty\/\" rel=\"noopener\" target=\"_blank\">2-year extended warranty<\/a> against bearing fluting damage. No other form of protection against VFD-caused bearing damage offers a warranty like this.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/est-aegis.com\/training\"><img decoding=\"async\" alt=\"\" class=\"alignleft wp-image-2150\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/webinar-icon-Dec-22-2021-03-25-23-31-PM.png\" width=\"114\"><\/a><br>To learn more about AEGIS shaft grounding and best practices for electrical bearing protection, <a href=\"https:\/\/www.est-aegis.com\/resources\/training\/\" rel=\"noopener\" target=\"_blank\">sign up for a training<\/a>. We offer monthly live training webinars, and &#8211; pandemic situation allowing &#8211; we can also visit your site and give an in-person training, with an emphasis on your specific needs.<\/p>\n\n","protected":false},"excerpt":{"rendered":"<p>In this installment: Arcing\/sparking, testing dc motors&#8217; shaft voltage, AEGIS rings vs common mode cores, and servo motors.<\/p>\n","protected":false},"author":7,"featured_media":1322,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"content-type":"","_relevanssi_hide_post":"","_relevanssi_hide_content":"","_relevanssi_pin_for_all":"","_relevanssi_pin_keywords":"","_relevanssi_unpin_keywords":"","_relevanssi_related_keywords":"","_relevanssi_related_include_ids":"","_relevanssi_related_exclude_ids":"","_relevanssi_related_no_append":"","_relevanssi_related_not_related":"","_relevanssi_related_posts":"","_relevanssi_noindex_reason":"","footnotes":""},"categories":[1063],"tags":[],"class_list":["post-83","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-qa-series"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO Pro 5.0.5.1 - aioseo.com -->\n\t<meta name=\"description\" content=\"In this installment: Arcing\/sparking, testing dc motors&#039; shaft voltage, AEGIS rings vs common mode cores, and servo motors.\" \/>\n\t<meta name=\"robots\" content=\"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n\t<meta name=\"author\" content=\"AEGIS\"\/>\n\t<link rel=\"canonical\" href=\"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/\" \/>\n\t\t<meta name=\"generator\" content=\"All in One SEO Pro (AIOSEO) 5.0.5.1\" \/>\n\t\t<meta property=\"og:locale\" content=\"es_ES\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Electro Static Technology\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Electrical Bearing Protection Q&amp;A Part 8\" \/>\n\t\t<meta property=\"og:description\" content=\"In this installment: Arcing\/sparking, testing dc motors&#039; shaft voltage, AEGIS rings vs common mode cores, and servo motors.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/wiki-arc-300x179-1.jpg\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/wiki-arc-300x179-1.jpg\" \/>\n\t\t<meta property=\"og:image:width\" content=\"300\" \/>\n\t\t<meta property=\"og:image:height\" content=\"179\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2021-02-02T15:57:51+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-10-22T18:51:52+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:site\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Electrical Bearing Protection Q&amp;A Part 8\" \/>\n\t\t<meta name=\"twitter:description\" content=\"In this installment: Arcing\/sparking, testing dc motors&#039; shaft voltage, AEGIS rings vs common mode cores, and servo motors.\" \/>\n\t\t<meta name=\"twitter:creator\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/wiki-arc-300x179-1.jpg\" \/>\n\t\t<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t\t<meta name=\"twitter:data1\" content=\"AEGIS\" \/>\n\t\t<meta name=\"twitter:label2\" content=\"Tiempo de lectura estimado\" \/>\n\t\t<meta name=\"twitter:data2\" content=\"3 minutos\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-8\\\/#article\",\"name\":\"Electrical Bearing Protection Q&A Part 8\",\"headline\":\"Electrical Bearing Protection Q&#038;A Part 8\",\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/wiki-arc-300x179-1.jpg\",\"width\":300,\"height\":179,\"caption\":\"#image_title\"},\"datePublished\":\"2021-02-02T10:57:51-05:00\",\"dateModified\":\"2026-10-22T14:51:52-04:00\",\"inLanguage\":\"es-ES\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-8\\\/#webpage\"},\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-8\\\/#webpage\"},\"articleSection\":\"Q&amp;A Series, Optional\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-8\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/qa-series\\\/#listItem\",\"name\":\"Q&amp;A Series\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/qa-series\\\/#listItem\",\"position\":2,\"name\":\"Q&amp;A Series\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/qa-series\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-8\\\/#listItem\",\"name\":\"Electrical Bearing Protection Q&#038;A Part 8\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-8\\\/#listItem\",\"position\":3,\"name\":\"Electrical Bearing Protection Q&#038;A Part 8\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/qa-series\\\/#listItem\",\"name\":\"Q&amp;A Series\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\",\"name\":\"Electro Static Technology\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/logo-aegis-1.svg\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-8\\\/#organizationLogo\",\"width\":244,\"height\":73,\"caption\":\"aegis logo\"},\"image\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-8\\\/#organizationLogo\"},\"sameAs\":[\"https:\\\/\\\/x.com\\\/AEGIS_rings\"],\"address\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#postaladdress\",\"@type\":\"PostalAddress\",\"streetAddress\":\"31 Winterbrook Road\",\"postalCode\":\"04256\",\"addressLocality\":\"Mechanic Falls\",\"addressRegion\":\"ME\",\"addressCountry\":\"US\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/\",\"name\":\"AEGIS\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-8\\\/#authorImage\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g\",\"width\":96,\"height\":96,\"caption\":\"AEGIS\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-8\\\/#webpage\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-8\\\/\",\"name\":\"Electrical Bearing Protection Q&A Part 8\",\"description\":\"In this installment: Arcing\\\/sparking, testing dc motors' shaft voltage, AEGIS rings vs common mode cores, and servo motors.\",\"inLanguage\":\"es-ES\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-8\\\/#breadcrumblist\"},\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"creator\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/wiki-arc-300x179-1.jpg\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-8\\\/#mainImage\",\"width\":300,\"height\":179,\"caption\":\"#image_title\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/electrical-bearing-protection-qa-part-8\\\/#mainImage\"},\"datePublished\":\"2021-02-02T10:57:51-05:00\",\"dateModified\":\"2026-10-22T14:51:52-04:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#website\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"name\":\"Electro Static Technology\",\"inLanguage\":\"es-ES\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO Pro -->\r\n\t\t<title>Electrical Bearing Protection Q&amp;A Part 8<\/title>\n\n","aioseo_head_json":{"title":"Electrical Bearing Protection Q&A Part 8","description":"In this installment: Arcing\/sparking, testing dc motors' shaft voltage, AEGIS rings vs common mode cores, and servo motors.","canonical_url":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/","robots":"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/#article","name":"Electrical Bearing Protection Q&A Part 8","headline":"Electrical Bearing Protection Q&#038;A Part 8","author":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"publisher":{"@id":"https:\/\/www.est-aegis.com\/es\/#organization"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/wiki-arc-300x179-1.jpg","width":300,"height":179,"caption":"#image_title"},"datePublished":"2021-02-02T10:57:51-05:00","dateModified":"2026-10-22T14:51:52-04:00","inLanguage":"es-ES","mainEntityOfPage":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/#webpage"},"isPartOf":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/#webpage"},"articleSection":"Q&amp;A Series, Optional"},{"@type":"BreadcrumbList","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/#listItem","position":1,"name":"Home","item":"https:\/\/www.est-aegis.com\/es\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/#listItem","name":"Q&amp;A Series"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/#listItem","position":2,"name":"Q&amp;A Series","item":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/#listItem","name":"Electrical Bearing Protection Q&#038;A Part 8"},"previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/#listItem","position":3,"name":"Electrical Bearing Protection Q&#038;A Part 8","previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/#listItem","name":"Q&amp;A Series"}}]},{"@type":"Organization","@id":"https:\/\/www.est-aegis.com\/es\/#organization","name":"Electro Static Technology","url":"https:\/\/www.est-aegis.com\/es\/","logo":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/logo-aegis-1.svg","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/#organizationLogo","width":244,"height":73,"caption":"aegis logo"},"image":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/#organizationLogo"},"sameAs":["https:\/\/x.com\/AEGIS_rings"],"address":{"@id":"https:\/\/www.est-aegis.com\/es\/#postaladdress","@type":"PostalAddress","streetAddress":"31 Winterbrook Road","postalCode":"04256","addressLocality":"Mechanic Falls","addressRegion":"ME","addressCountry":"US"}},{"@type":"Person","@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author","url":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/","name":"AEGIS","image":{"@type":"ImageObject","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/#authorImage","url":"https:\/\/secure.gravatar.com\/avatar\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g","width":96,"height":96,"caption":"AEGIS"}},{"@type":"WebPage","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/#webpage","url":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/","name":"Electrical Bearing Protection Q&A Part 8","description":"In this installment: Arcing\/sparking, testing dc motors' shaft voltage, AEGIS rings vs common mode cores, and servo motors.","inLanguage":"es-ES","isPartOf":{"@id":"https:\/\/www.est-aegis.com\/es\/#website"},"breadcrumb":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/#breadcrumblist"},"author":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"creator":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/wiki-arc-300x179-1.jpg","@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/#mainImage","width":300,"height":179,"caption":"#image_title"},"primaryImageOfPage":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/#mainImage"},"datePublished":"2021-02-02T10:57:51-05:00","dateModified":"2026-10-22T14:51:52-04:00"},{"@type":"WebSite","@id":"https:\/\/www.est-aegis.com\/es\/#website","url":"https:\/\/www.est-aegis.com\/es\/","name":"Electro Static Technology","inLanguage":"es-ES","publisher":{"@id":"https:\/\/www.est-aegis.com\/es\/#organization"}}]},"og:locale":"es_ES","og:site_name":"Electro Static Technology","og:type":"article","og:title":"Electrical Bearing Protection Q&amp;A Part 8","og:description":"In this installment: Arcing\/sparking, testing dc motors' shaft voltage, AEGIS rings vs common mode cores, and servo motors.","og:url":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/","og:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/wiki-arc-300x179-1.jpg","og:image:secure_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/wiki-arc-300x179-1.jpg","og:image:width":300,"og:image:height":179,"article:published_time":"2021-02-02T15:57:51+00:00","article:modified_time":"2026-10-22T18:51:52+00:00","twitter:card":"summary_large_image","twitter:site":"@AEGIS_rings","twitter:title":"Electrical Bearing Protection Q&amp;A Part 8","twitter:description":"In this installment: Arcing\/sparking, testing dc motors' shaft voltage, AEGIS rings vs common mode cores, and servo motors.","twitter:creator":"@AEGIS_rings","twitter:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/wiki-arc-300x179-1.jpg","twitter:label1":"Escrito por","twitter:data1":"AEGIS","twitter:label2":"Tiempo de lectura estimado","twitter:data2":"3 minutos"},"aioseo_meta_data":{"post_id":"83","title":"Electrical Bearing Protection Q&A Part 8","description":"In this installment: Arcing\/sparking, testing dc motors' shaft voltage, AEGIS rings vs common mode cores, and servo motors.","keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"seo_analyzer_scan_date":"2026-10-28 18:17:37","breadcrumb_settings":null,"limit_modified_date":false,"reviewed_by":null,"open_ai":null,"ai":null,"created":"2026-10-22 16:13:50","updated":"2026-11-16 20:18:33","focus_keyword":null,"additional_keywords":null,"truseo_locale":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/es\/\" title=\"Home\">Home<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/\" title=\"Q&amp;A Series\">Q&amp;A Series<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\tElectrical Bearing Protection Q&amp;A Part 8\n<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/www.est-aegis.com\/es\/"},{"label":"Q&amp;A Series","link":"https:\/\/www.est-aegis.com\/es\/blog\/category\/qa-series\/"},{"label":"Electrical Bearing Protection Q&#038;A Part 8","link":"https:\/\/www.est-aegis.com\/es\/blog\/electrical-bearing-protection-qa-part-8\/"}],"jetpack_featured_media_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/wiki-arc-300x179-1.jpg","_links":{"self":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/83","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/comments?post=83"}],"version-history":[{"count":2,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/83\/revisions"}],"predecessor-version":[{"id":10532,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/83\/revisions\/10532"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/media\/1322"}],"wp:attachment":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/media?parent=83"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/categories?post=83"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/tags?post=83"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}