{"id":94,"date":"2019-12-04T13:19:25","date_gmt":"2019-12-04T18:19:25","guid":{"rendered":"https:\/\/www.est-aegis.com\/?p=94"},"modified":"2026-10-22T15:01:12","modified_gmt":"2026-10-22T19:01:12","slug":"geothermal-systems-need-shaft-grounding","status":"publish","type":"post","link":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/","title":{"rendered":"Geothermal Systems Need Shaft Grounding"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">When people think of renewable power, wind and solar usually come to mind.\u00a0 But there are other fully sustainable power generation methods.\u00a0 One that&#8217;s rapidly becoming more important is geothermal power. There are a few different geothermal generation schemes, but they all involve pumping hot water out from deep in the earth and using its heat energy to spin a turbine. (Geothermal energy can be used for district heating as well.)<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"alignright size-full is-resized\"><img decoding=\"async\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/800px-Krafla_geothermal_power_station_wiki.jpg\" alt=\"800px-Krafla_geothermal_power_station_wiki\" style=\"width:300px\"\/><\/figure>\n<\/div>\n\n\n<p class=\"wp-block-paragraph\"><span style=\"font-size: 19px;\">Like wind and solar, geothermal energy has low-to-no CO <sub>2<\/sub> emissions.\u00a0 But geothermal also has the big advantage that it&#8217;s always on.\u00a0 The sun goes down, and wind comes and goes, but the center of the earth is <span style=\"text-decoration: underline;\">always<\/span> hot.\u00a0 That heat can be used to generate electricity at any time, day or night, breezy or calm.\u00a0 As of 2015, geothermal power produced 12.8 gigawatts (GW) of electricity.\u00a0 By 2020, that total is expected to reach 14.5-17.5 GW.<\/span><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But geothermal generation also has problems.\u00a0 Good sites can be difficult to find.\u00a0 And the steamy and briny conditions at running plants are corrosive, both to pumps and the motors that drive them.\u00a0 More about those motors:\u00a0 Geothermal plants run 24\/7, and demand for electricity (and heat) varies daily (and seasonally).\u00a0 So the pump-driving motors need to be run at variable speed.\u00a0 Faster when demand is high; slower when it&#8217;s low.\u00a0 Usually the motors&#8217; speed is controlled by variable frequency drives (VFDs).\u00a0 But VFD operation causes problems of its own.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><img loading=\"lazy\" decoding=\"async\" class=\"alignright\" alt=\"installation\" height=\"533\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/installation-1.jpg\" width=\"300\"><a href=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/installation.jpg\" linktext=\"\" rel=\"noopener\"><\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The pulses of power that VFDs put out create voltage on the shafts of the motors they control.\u00a0 If shaft voltage builds up high enough, it will arc through the motor or pump bearings, causing electrical damage.\u00a0 This damage builds up over time, and causes premature bearing failure.\u00a0 When the motor or pump bearings fail, they must be replaced, an expensive operation.\u00a0 The failure may also cause unplanned downtime and massive loss of revenue.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The solution is to provide a low resistance path from the shaft to ground.\u00a0 This is exactly what <a href=\"https:\/\/www.est-aegis.com\/product\/sgr\/\" rel=\"noopener\" target=\"_blank\">AEGIS<sup>\u00ae<\/sup> Shaft Grounding Rings<\/a> provide.\u00a0 With an AEGIS ring installed, charge flows safely through the ring, instead of discharging through a bearing.\u00a0 For motors up to 100 hp (75 kW), an AEGIS ring is all the electrical protection you need.\u00a0 Larger motors need an AEGIS ring along with one insulated bearing.\u00a0 (The insulated bearing protects against circulating currents, which are a problem in larger motors on VFDs.)<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">AEGIS rings are available factory-installed in several makes and hundreds of models of motor.\u00a0 AEGIS comes installed inside everything from general purpose to explosion proof to vertical hollowshaft motors from makers like <a href=\"https:\/\/www.est-aegis.com\/where-to-buy\/oems-with-aegis\/\" rel=\"noopener\" target=\"_blank\">US Motors<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">AEGIS Rings also come with a <a href=\"https:\/\/www.est-aegis.com\/product\/extended-warranty\/\" rel=\"noopener\" target=\"_blank\">2-year extended warranty<\/a> against bearing fluting damage. No other form of protection against VFD-caused bearing damage offers a warranty like this.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">To learn more about AEGIS shaft grounding and best practices for electrical bearing protection, <a href=\"https:\/\/www.est-aegis.com\/resources\/training\/\" rel=\"noopener\" target=\"_blank\">sign up for a training<\/a>. We offer monthly live training webinars, and &#8211; pandemic restrictions permitting &#8211; we can also visit your facility to review your exact application.<\/p>\n\n\n\n<div class=\"wp-block-buttons is-content-justification-center is-layout-flex wp-container-core-buttons-is-layout-fe48e5de wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/www.est-aegis.com\/resources\/training\/\">Sign Up For Training<\/a><\/div>\n<\/div>\n\n","protected":false},"excerpt":{"rendered":"<p>Geothermal generation uses electric motors run by variable speed drives. Those motors need shaft grounding to protect them from electrical bearing damage.<\/p>\n","protected":false},"author":7,"featured_media":9349,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"content-type":"","_relevanssi_hide_post":"","_relevanssi_hide_content":"","_relevanssi_pin_for_all":"","_relevanssi_pin_keywords":"","_relevanssi_unpin_keywords":"","_relevanssi_related_keywords":"","_relevanssi_related_include_ids":"","_relevanssi_related_exclude_ids":"","_relevanssi_related_no_append":"","_relevanssi_related_not_related":"","_relevanssi_related_posts":"","_relevanssi_noindex_reason":"","footnotes":""},"categories":[1064],"tags":[],"class_list":["post-94","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-applications-and-industries"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO Pro 5.0.5.1 - aioseo.com -->\n\t<meta name=\"description\" content=\"Geothermal generation uses electric motors run by variable speed drives. Those motors need shaft grounding to protect them from electrical bearing damage.\" \/>\n\t<meta name=\"robots\" content=\"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n\t<meta name=\"author\" content=\"AEGIS\"\/>\n\t<link rel=\"canonical\" href=\"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/\" \/>\n\t\t<meta name=\"generator\" content=\"All in One SEO Pro (AIOSEO) 5.0.5.1\" \/>\n\t\t<meta property=\"og:locale\" content=\"es_ES\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Electro Static Technology\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Geothermal Systems Need Shaft Grounding\" \/>\n\t\t<meta property=\"og:description\" content=\"Geothermal generation uses electric motors run by variable speed drives. Those motors need shaft grounding to protect them from electrical bearing damage.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/installation-169x300-1.jpg\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/installation-169x300-1.jpg\" \/>\n\t\t<meta property=\"og:image:width\" content=\"169\" \/>\n\t\t<meta property=\"og:image:height\" content=\"300\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2019-12-04T18:19:25+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-10-22T19:01:12+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:site\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Geothermal Systems Need Shaft Grounding\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Geothermal generation uses electric motors run by variable speed drives. Those motors need shaft grounding to protect them from electrical bearing damage.\" \/>\n\t\t<meta name=\"twitter:creator\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/installation-169x300-1.jpg\" \/>\n\t\t<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t\t<meta name=\"twitter:data1\" content=\"AEGIS\" \/>\n\t\t<meta name=\"twitter:label2\" content=\"Tiempo de lectura estimado\" \/>\n\t\t<meta name=\"twitter:data2\" content=\"2 minutos\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/geothermal-systems-need-shaft-grounding\\\/#article\",\"name\":\"Geothermal Systems Need Shaft Grounding\",\"headline\":\"Geothermal Systems Need Shaft Grounding\",\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/installation-169x300-1.jpg\",\"width\":169,\"height\":300,\"caption\":\"#image_title\"},\"datePublished\":\"2019-12-04T13:19:25-05:00\",\"dateModified\":\"2026-10-22T15:01:12-04:00\",\"inLanguage\":\"es-ES\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/geothermal-systems-need-shaft-grounding\\\/#webpage\"},\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/geothermal-systems-need-shaft-grounding\\\/#webpage\"},\"articleSection\":\"Applications &amp; Industries, Opcional\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/geothermal-systems-need-shaft-grounding\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/applications-and-industries\\\/#listItem\",\"name\":\"Applications &amp; Industries\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/applications-and-industries\\\/#listItem\",\"position\":2,\"name\":\"Applications &amp; Industries\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/applications-and-industries\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/geothermal-systems-need-shaft-grounding\\\/#listItem\",\"name\":\"Geothermal Systems Need Shaft Grounding\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/geothermal-systems-need-shaft-grounding\\\/#listItem\",\"position\":3,\"name\":\"Geothermal Systems Need Shaft Grounding\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/category\\\/applications-and-industries\\\/#listItem\",\"name\":\"Applications &amp; Industries\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\",\"name\":\"Electro Static Technology\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/logo-aegis-1.svg\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/geothermal-systems-need-shaft-grounding\\\/#organizationLogo\",\"width\":244,\"height\":73,\"caption\":\"aegis logo\"},\"image\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/geothermal-systems-need-shaft-grounding\\\/#organizationLogo\"},\"sameAs\":[\"https:\\\/\\\/x.com\\\/AEGIS_rings\"],\"address\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#postaladdress\",\"@type\":\"PostalAddress\",\"streetAddress\":\"31 Winterbrook Road\",\"postalCode\":\"04256\",\"addressLocality\":\"Mechanic Falls\",\"addressRegion\":\"ME\",\"addressCountry\":\"US\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/\",\"name\":\"AEGIS\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/geothermal-systems-need-shaft-grounding\\\/#authorImage\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g\",\"width\":96,\"height\":96,\"caption\":\"AEGIS\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/geothermal-systems-need-shaft-grounding\\\/#webpage\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/geothermal-systems-need-shaft-grounding\\\/\",\"name\":\"Geothermal Systems Need Shaft Grounding\",\"description\":\"Geothermal generation uses electric motors run by variable speed drives. Those motors need shaft grounding to protect them from electrical bearing damage.\",\"inLanguage\":\"es-ES\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/geothermal-systems-need-shaft-grounding\\\/#breadcrumblist\"},\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"creator\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/author\\\/aegis\\\/#author\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/installation-169x300-1.jpg\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/geothermal-systems-need-shaft-grounding\\\/#mainImage\",\"width\":169,\"height\":300,\"caption\":\"#image_title\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/blog\\\/geothermal-systems-need-shaft-grounding\\\/#mainImage\"},\"datePublished\":\"2019-12-04T13:19:25-05:00\",\"dateModified\":\"2026-10-22T15:01:12-04:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#website\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/\",\"name\":\"Electro Static Technology\",\"inLanguage\":\"es-ES\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/es\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO Pro -->\r\n\t\t<title>Geothermal Systems Need Shaft Grounding<\/title>\n\n","aioseo_head_json":{"title":"Geothermal Systems Need Shaft Grounding","description":"Geothermal generation uses electric motors run by variable speed drives. Those motors need shaft grounding to protect them from electrical bearing damage.","canonical_url":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/","robots":"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/#article","name":"Geothermal Systems Need Shaft Grounding","headline":"Geothermal Systems Need Shaft Grounding","author":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"publisher":{"@id":"https:\/\/www.est-aegis.com\/es\/#organization"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/installation-169x300-1.jpg","width":169,"height":300,"caption":"#image_title"},"datePublished":"2019-12-04T13:19:25-05:00","dateModified":"2026-10-22T15:01:12-04:00","inLanguage":"es-ES","mainEntityOfPage":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/#webpage"},"isPartOf":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/#webpage"},"articleSection":"Applications &amp; Industries, Opcional"},{"@type":"BreadcrumbList","@id":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/#listItem","position":1,"name":"Home","item":"https:\/\/www.est-aegis.com\/es\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/applications-and-industries\/#listItem","name":"Applications &amp; Industries"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/applications-and-industries\/#listItem","position":2,"name":"Applications &amp; Industries","item":"https:\/\/www.est-aegis.com\/es\/blog\/category\/applications-and-industries\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/#listItem","name":"Geothermal Systems Need Shaft Grounding"},"previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/#listItem","position":3,"name":"Geothermal Systems Need Shaft Grounding","previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/es\/blog\/category\/applications-and-industries\/#listItem","name":"Applications &amp; Industries"}}]},{"@type":"Organization","@id":"https:\/\/www.est-aegis.com\/es\/#organization","name":"Electro Static Technology","url":"https:\/\/www.est-aegis.com\/es\/","logo":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/logo-aegis-1.svg","@id":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/#organizationLogo","width":244,"height":73,"caption":"aegis logo"},"image":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/#organizationLogo"},"sameAs":["https:\/\/x.com\/AEGIS_rings"],"address":{"@id":"https:\/\/www.est-aegis.com\/es\/#postaladdress","@type":"PostalAddress","streetAddress":"31 Winterbrook Road","postalCode":"04256","addressLocality":"Mechanic Falls","addressRegion":"ME","addressCountry":"US"}},{"@type":"Person","@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author","url":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/","name":"AEGIS","image":{"@type":"ImageObject","@id":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/#authorImage","url":"https:\/\/secure.gravatar.com\/avatar\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g","width":96,"height":96,"caption":"AEGIS"}},{"@type":"WebPage","@id":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/#webpage","url":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/","name":"Geothermal Systems Need Shaft Grounding","description":"Geothermal generation uses electric motors run by variable speed drives. Those motors need shaft grounding to protect them from electrical bearing damage.","inLanguage":"es-ES","isPartOf":{"@id":"https:\/\/www.est-aegis.com\/es\/#website"},"breadcrumb":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/#breadcrumblist"},"author":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"creator":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/author\/aegis\/#author"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/installation-169x300-1.jpg","@id":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/#mainImage","width":169,"height":300,"caption":"#image_title"},"primaryImageOfPage":{"@id":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/#mainImage"},"datePublished":"2019-12-04T13:19:25-05:00","dateModified":"2026-10-22T15:01:12-04:00"},{"@type":"WebSite","@id":"https:\/\/www.est-aegis.com\/es\/#website","url":"https:\/\/www.est-aegis.com\/es\/","name":"Electro Static Technology","inLanguage":"es-ES","publisher":{"@id":"https:\/\/www.est-aegis.com\/es\/#organization"}}]},"og:locale":"es_ES","og:site_name":"Electro Static Technology","og:type":"article","og:title":"Geothermal Systems Need Shaft Grounding","og:description":"Geothermal generation uses electric motors run by variable speed drives. Those motors need shaft grounding to protect them from electrical bearing damage.","og:url":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/","og:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/installation-169x300-1.jpg","og:image:secure_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/installation-169x300-1.jpg","og:image:width":169,"og:image:height":300,"article:published_time":"2019-12-04T18:19:25+00:00","article:modified_time":"2026-10-22T19:01:12+00:00","twitter:card":"summary_large_image","twitter:site":"@AEGIS_rings","twitter:title":"Geothermal Systems Need Shaft Grounding","twitter:description":"Geothermal generation uses electric motors run by variable speed drives. Those motors need shaft grounding to protect them from electrical bearing damage.","twitter:creator":"@AEGIS_rings","twitter:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/installation-169x300-1.jpg","twitter:label1":"Escrito por","twitter:data1":"AEGIS","twitter:label2":"Tiempo de lectura estimado","twitter:data2":"2 minutos"},"aioseo_meta_data":{"post_id":"94","title":"Geothermal Systems Need Shaft Grounding","description":"Geothermal generation uses electric motors run by variable speed drives. Those motors need shaft grounding to protect them from electrical bearing damage.","keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"seo_analyzer_scan_date":"2026-10-28 18:42:57","breadcrumb_settings":null,"limit_modified_date":false,"reviewed_by":null,"open_ai":null,"ai":null,"created":"2026-10-22 16:13:53","updated":"2026-11-16 20:21:44","focus_keyword":null,"additional_keywords":null,"truseo_locale":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/es\/\" title=\"Home\">Home<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/es\/blog\/category\/applications-and-industries\/\" title=\"Applications &amp; Industries\">Applications &amp; Industries<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\tGeothermal Systems Need Shaft Grounding\n<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/www.est-aegis.com\/es\/"},{"label":"Applications &amp; Industries","link":"https:\/\/www.est-aegis.com\/es\/blog\/category\/applications-and-industries\/"},{"label":"Geothermal Systems Need Shaft Grounding","link":"https:\/\/www.est-aegis.com\/es\/blog\/geothermal-systems-need-shaft-grounding\/"}],"jetpack_featured_media_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/installation-169x300-1.jpg","_links":{"self":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/94","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/comments?post=94"}],"version-history":[{"count":3,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/94\/revisions"}],"predecessor-version":[{"id":10745,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/posts\/94\/revisions\/10745"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/media\/9349"}],"wp:attachment":[{"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/media?parent=94"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/categories?post=94"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.est-aegis.com\/es\/wp-json\/wp\/v2\/tags?post=94"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}