{"id":10178,"date":"2022-01-19T09:20:00","date_gmt":"2022-01-19T14:20:00","guid":{"rendered":"https:\/\/www.est-aegis.com\/?p=144"},"modified":"2026-10-22T15:00:59","modified_gmt":"2026-10-22T19:00:59","slug":"proper-grounding-is-vital-for-motors-on-drives","status":"publish","type":"post","link":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/","title":{"rendered":"Proper Grounding is Vital for Motors on Drives"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">We talk a lot about shaft grounding for motors on drives, to mitigate electrical bearing damage.\u00a0 It almost goes without saying that motors\u2019 frames need to be grounded, too.\u00a0<span>\u00a0<\/span><em>Almost.\u00a0<span>\u00a0<\/span><\/em>In fact, poor frame grounding contributes to electrical bearing damage as well.\u00a0 This bears discussion.\u00a0 For a video presentation, see<span>\u00a0<\/span><a href=\"https:\/\/www.horizonsolutions.com\/resources\/webinars\/ondemand\/properdriveinstallation\" rel=\"noopener\" target=\"_blank\">this excellent on-demand webinar<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">When a motor is run across the line, the voltage and current supplied to it are balanced.\u00a0 In a perfect world, all of the current flowing through the motor would always be in the three phase wires.\u00a0 Current would flow in through one phase, and return to the mains through the others.\u00a0 No grounding would be necessary.\u00a0 See A in the figure below.\u00a0 In the real world, the motor frame is grounded for safety reasons.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If an ungrounded frame was energized by a fault in one of the phases, it would create a lethal safety hazard.\u00a0 The motor might still run, but the frame would be \u201chot.\u201d\u00a0 If someone touched the frame (B), their body would create an alternate path to ground (and back to the mains), and they would be shocked or electrocuted.\u00a0 Grounding the frame gives any stray current a safe low-resistance path to ground and back to the mains (C), mitigating the hazard.\u00a0 (The faulty motor would still need repair, but it would be much less likely to cause severe injury.)<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><img decoding=\"async\" class=\"aligncenter\" alt=\"safety-ground-768x237\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/safety-ground-768x237-1.png\" width=\"768\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><span style=\"font-weight: bold;\">A:<\/span> Ungrounded motor with no faults.\u00a0 All current (yellow) enters and leaves the motor through the phase wires (green).\u00a0 <span style=\"font-weight: bold;\">B:<\/span> A fault (red) energizes the frame and creates a shock hazard. When touched, current runs from the frame, through the man, to ground.\u00a0 <span style=\"font-weight: bold;\">C:<\/span> With the frame grounded, stray current goes through the ground wire (dark green) instead of the man.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">When a motor is powered by a drive, neither the voltage nor current is balanced.\u00a0 Drives\u2019 output contains a lot of high-frequency (HF) noise.\u00a0 The frequency is important, because the motor windings have high impedance to HF currents.\u00a0 Consequently this noise will seek an alternate path back to the drive.\u00a0 When a drive\u2019s output gets to a motor, the low frequency components of the current move through the phase windings, just like in a motor on line power.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But the HF current seeks an alternate route back to the drive.\u00a0 Rather than going through the stator windings, it moves (by capacitive coupling) onto the motor frame.\u00a0 From the motor frame, it will move back to the drive by every path it can find.\u00a0 If the motor is well-grounded, HF current will run to ground and then back to the drive.\u00a0 But if the motor is poorly grounded, it may arc through the bearings to the shaft, and seek ground through the coupled equipment.\u00a0 This is called<span>\u00a0<\/span><em>rotor ground current<\/em>, and it is the most destructive type of bearing current.\u00a0 It not only damages the motor bearings, but those of the driven equipment (pump, gearbox, etc.).<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">There are a few ways to avoid rotor ground current.\u00a0 Bonding the motor frame to the driven equipment gives stray current a lower-resistance path than going through the bearings.\u00a0 High frequency grounding straps, like the<span>\u00a0<\/span><a href=\"https:\/\/www.est-aegis.com\/HFGS\/\">AEGIS<sup>\u00ae<\/sup><span>\u00a0<\/span>HFGS<\/a>, work well for protecting motor and equipment bearings this way.\u00a0 Grounding straps are good for protecting bearings, but they\u2019re not always enough.\u00a0 Bonding the motor and equipment frames still leaves the stray current free to meander through the facility grounding system on its way back to the drive.\u00a0 This can cause interference with or damage to sensitive equipment in the noise\u2019s path.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><img decoding=\"async\" class=\"alignright\" alt=\"vfdcable-300x169\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/vfdcable-300x169-1.jpg\" width=\"300\"><span style=\"font-size: 1.1875em; background-color: transparent; letter-spacing: 0.02em;\">Cross sections of high-end VFD cable.\u00a0 These examples include three symmetrically arranged ground wires and a conductive mesh sheath.<\/span><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In addition to motor-load bonding, you should<span>\u00a0<\/span><a href=\"https:\/\/forums.mikeholt.com\/threads\/vfd-created-static.2557433\/post-2625220\" rel=\"noopener\" target=\"_blank\">bond the motor directly to the drive<\/a><span>\u00a0<\/span>using proper VFD cable.\u00a0 There are many options for this, and drive manufacturers\u2019 recommendations vary somewhat.<span>\u00a0<\/span><a href=\"https:\/\/library.e.abb.com\/public\/64a0f2f7292bcfd7c1257b3a003993ea\/EN_Grounding_and_cabling_rev_C.pdf\" rel=\"noopener\" target=\"_blank\">ABB<\/a><span>\u00a0<\/span>and<span>\u00a0<\/span><a href=\"https:\/\/literature.rockwellautomation.com\/idc\/groups\/literature\/documents\/in\/drives-in001_-en-p.pdf\" rel=\"noopener\" target=\"_blank\">Rockwell Automation<\/a><span>\u00a0<\/span>have excellent booklets on grounding motors and drives.\u00a0 Variations aside, all good VFD cables include one or more ground conductors bonding the motor frame and the drive, and usually conductive mesh or foil shielding.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">One more point: The cable\u2019s shield must be properly terminated.\u00a0 If not, most of its benefits will be lost.\u00a0 See<span>\u00a0<\/span><a href=\"http:\/\/industrial.southwire.com\/en\/techblog\/2017\/01\/03\/terminating-vfd-cables\/\" rel=\"noopener\" target=\"_blank\">this blogpost<\/a>, or the guides linked above, for details.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">With properly installed cable, up to 95% of the HF current moves directly from the motor frame back to the drive.\u00a0 Good cable thus protects the motor and equipment bearings from rotor ground current,<span>\u00a0<\/span><em>and<\/em><span>\u00a0<\/span>protects other sensitive equipment from stray noise current.\u00a0 We\u2019ve only discussed conducted noise, but good cable minimizes radiated noise as well.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">All of this said, rotor ground current is not the only source of electrical bearing damage.\u00a0 Proper cabling practices do not stop shaft voltage from building up and causing arcing through the bearings.\u00a0 So no matter how good the VFD cable, motors on drives still need reliable shaft grounding, like an AEGIS Shaft Grounding Ring.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">AEGIS Rings also come with a <a href=\"https:\/\/www.est-aegis.com\/product\/extended-warranty\/\" rel=\"noopener\" target=\"_blank\">2-year extended warranty<\/a> against bearing fluting damage. No other form of protection against VFD-caused bearing damage offers a warranty like this.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">To learn more about AEGIS shaft grounding and best practices for electrical bearing protection, <a href=\"https:\/\/www.est-aegis.com\/resources\/training\/\" rel=\"noopener\" target=\"_blank\">sign up for a training<\/a>. We offer monthly live training webinars, and we can also visit your facility to review your exact application.<\/p>\n\n\n\n<div class=\"wp-block-buttons is-content-justification-center is-layout-flex wp-container-core-buttons-is-layout-fe48e5de wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/www.est-aegis.com\/resources\/training\/\">Sign Up For Training<\/a><\/div>\n<\/div>\n\n","protected":false},"excerpt":{"rendered":"<p>Proper grounding is important for all electric motors. It&rsquo;s especially important when using a drive, to protect motor &#038; equipment bearings.<\/p>\n","protected":false},"author":7,"featured_media":1427,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"content-type":"","_relevanssi_hide_post":"","_relevanssi_hide_content":"","_relevanssi_pin_for_all":"","_relevanssi_pin_keywords":"","_relevanssi_unpin_keywords":"","_relevanssi_related_keywords":"","_relevanssi_related_include_ids":"","_relevanssi_related_exclude_ids":"","_relevanssi_related_no_append":"","_relevanssi_related_not_related":"","_relevanssi_related_posts":"","_relevanssi_noindex_reason":"","footnotes":""},"categories":[1065],"tags":[],"class_list":["post-10178","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-bearing-damage-basics"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO Pro 5.0.5.1 - aioseo.com -->\n\t<meta name=\"description\" content=\"Proper grounding is important for all electric motors. It&#039;s especially important when using a drive, to protect motor &amp; equipment bearings.\" \/>\n\t<meta name=\"robots\" content=\"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n\t<meta name=\"author\" content=\"AEGIS\"\/>\n\t<link rel=\"canonical\" href=\"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/\" \/>\n\t\t<meta name=\"generator\" content=\"All in One SEO Pro (AIOSEO) 5.0.5.1\" \/>\n\t\t<meta property=\"og:locale\" content=\"fr_FR\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Electro Static Technology\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Proper Grounding is Vital for Motors on Drives\" \/>\n\t\t<meta property=\"og:description\" content=\"Proper grounding is important for all electric motors. It&#039;s especially important when using a drive, to protect motor &amp; equipment bearings.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/safety-ground-768x237-1.png\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/safety-ground-768x237-1.png\" \/>\n\t\t<meta property=\"og:image:width\" content=\"768\" \/>\n\t\t<meta property=\"og:image:height\" content=\"237\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2022-01-19T14:20:00+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-10-22T19:00:59+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:site\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Proper Grounding is Vital for Motors on Drives\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Proper grounding is important for all electric motors. It&#039;s especially important when using a drive, to protect motor &amp; equipment bearings.\" \/>\n\t\t<meta name=\"twitter:creator\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/safety-ground-768x237-1.png\" \/>\n\t\t<meta name=\"twitter:label1\" content=\"\u00c9crit par\" \/>\n\t\t<meta name=\"twitter:data1\" content=\"AEGIS\" \/>\n\t\t<meta name=\"twitter:label2\" content=\"Estimation du temps de lecture\" \/>\n\t\t<meta name=\"twitter:data2\" content=\"4 minutes\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/proper-grounding-is-vital-for-motors-on-drives\\\/#article\",\"name\":\"Proper Grounding is Vital for Motors on Drives\",\"headline\":\"Proper Grounding is Vital for Motors on Drives\",\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/#author\"},\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#organization\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/safety-ground-768x237-1.png\",\"width\":768,\"height\":237,\"caption\":\"#image_title\"},\"datePublished\":\"2022-01-19T09:20:00-05:00\",\"dateModified\":\"2026-10-22T15:00:59-04:00\",\"inLanguage\":\"fr-FR\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/proper-grounding-is-vital-for-motors-on-drives\\\/#webpage\"},\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/proper-grounding-is-vital-for-motors-on-drives\\\/#webpage\"},\"articleSection\":\"Bearing Damage Basics, Optional\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/proper-grounding-is-vital-for-motors-on-drives\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/category\\\/bearing-damage-basics\\\/#listItem\",\"name\":\"Bearing Damage Basics\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/category\\\/bearing-damage-basics\\\/#listItem\",\"position\":2,\"name\":\"Bearing Damage Basics\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/category\\\/bearing-damage-basics\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/proper-grounding-is-vital-for-motors-on-drives\\\/#listItem\",\"name\":\"Proper Grounding is Vital for Motors on Drives\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/proper-grounding-is-vital-for-motors-on-drives\\\/#listItem\",\"position\":3,\"name\":\"Proper Grounding is Vital for Motors on Drives\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/category\\\/bearing-damage-basics\\\/#listItem\",\"name\":\"Bearing Damage Basics\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#organization\",\"name\":\"Electro Static Technology\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/logo-aegis-1.svg\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/proper-grounding-is-vital-for-motors-on-drives\\\/#organizationLogo\",\"width\":244,\"height\":73,\"caption\":\"aegis logo\"},\"image\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/proper-grounding-is-vital-for-motors-on-drives\\\/#organizationLogo\"},\"sameAs\":[\"https:\\\/\\\/x.com\\\/AEGIS_rings\"],\"address\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#postaladdress\",\"@type\":\"PostalAddress\",\"streetAddress\":\"31 Winterbrook Road\",\"postalCode\":\"04256\",\"addressLocality\":\"Mechanic Falls\",\"addressRegion\":\"ME\",\"addressCountry\":\"US\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/#author\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/\",\"name\":\"AEGIS\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/proper-grounding-is-vital-for-motors-on-drives\\\/#authorImage\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g\",\"width\":96,\"height\":96,\"caption\":\"AEGIS\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/proper-grounding-is-vital-for-motors-on-drives\\\/#webpage\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/proper-grounding-is-vital-for-motors-on-drives\\\/\",\"name\":\"Proper Grounding is Vital for Motors on Drives\",\"description\":\"Proper grounding is important for all electric motors. It's especially important when using a drive, to protect motor & equipment bearings.\",\"inLanguage\":\"fr-FR\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/proper-grounding-is-vital-for-motors-on-drives\\\/#breadcrumblist\"},\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/#author\"},\"creator\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/#author\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/safety-ground-768x237-1.png\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/proper-grounding-is-vital-for-motors-on-drives\\\/#mainImage\",\"width\":768,\"height\":237,\"caption\":\"#image_title\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/proper-grounding-is-vital-for-motors-on-drives\\\/#mainImage\"},\"datePublished\":\"2022-01-19T09:20:00-05:00\",\"dateModified\":\"2026-10-22T15:00:59-04:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#website\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/\",\"name\":\"Electro Static Technology\",\"inLanguage\":\"fr-FR\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO Pro -->\r\n\t\t<title>Proper Grounding is Vital for Motors on Drives<\/title>\n\n","aioseo_head_json":{"title":"Proper Grounding is Vital for Motors on Drives","description":"Proper grounding is important for all electric motors. It's especially important when using a drive, to protect motor & equipment bearings.","canonical_url":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/","robots":"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/#article","name":"Proper Grounding is Vital for Motors on Drives","headline":"Proper Grounding is Vital for Motors on Drives","author":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/#author"},"publisher":{"@id":"https:\/\/www.est-aegis.com\/fr\/#organization"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/safety-ground-768x237-1.png","width":768,"height":237,"caption":"#image_title"},"datePublished":"2022-01-19T09:20:00-05:00","dateModified":"2026-10-22T15:00:59-04:00","inLanguage":"fr-FR","mainEntityOfPage":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/#webpage"},"isPartOf":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/#webpage"},"articleSection":"Bearing Damage Basics, Optional"},{"@type":"BreadcrumbList","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/#listItem","position":1,"name":"Home","item":"https:\/\/www.est-aegis.com\/fr\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/bearing-damage-basics\/#listItem","name":"Bearing Damage Basics"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/bearing-damage-basics\/#listItem","position":2,"name":"Bearing Damage Basics","item":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/bearing-damage-basics\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/#listItem","name":"Proper Grounding is Vital for Motors on Drives"},"previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/#listItem","position":3,"name":"Proper Grounding is Vital for Motors on Drives","previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/bearing-damage-basics\/#listItem","name":"Bearing Damage Basics"}}]},{"@type":"Organization","@id":"https:\/\/www.est-aegis.com\/fr\/#organization","name":"Electro Static Technology","url":"https:\/\/www.est-aegis.com\/fr\/","logo":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/logo-aegis-1.svg","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/#organizationLogo","width":244,"height":73,"caption":"aegis logo"},"image":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/#organizationLogo"},"sameAs":["https:\/\/x.com\/AEGIS_rings"],"address":{"@id":"https:\/\/www.est-aegis.com\/fr\/#postaladdress","@type":"PostalAddress","streetAddress":"31 Winterbrook Road","postalCode":"04256","addressLocality":"Mechanic Falls","addressRegion":"ME","addressCountry":"US"}},{"@type":"Person","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/#author","url":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/","name":"AEGIS","image":{"@type":"ImageObject","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/#authorImage","url":"https:\/\/secure.gravatar.com\/avatar\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g","width":96,"height":96,"caption":"AEGIS"}},{"@type":"WebPage","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/#webpage","url":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/","name":"Proper Grounding is Vital for Motors on Drives","description":"Proper grounding is important for all electric motors. It's especially important when using a drive, to protect motor & equipment bearings.","inLanguage":"fr-FR","isPartOf":{"@id":"https:\/\/www.est-aegis.com\/fr\/#website"},"breadcrumb":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/#breadcrumblist"},"author":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/#author"},"creator":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/#author"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/safety-ground-768x237-1.png","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/#mainImage","width":768,"height":237,"caption":"#image_title"},"primaryImageOfPage":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/#mainImage"},"datePublished":"2022-01-19T09:20:00-05:00","dateModified":"2026-10-22T15:00:59-04:00"},{"@type":"WebSite","@id":"https:\/\/www.est-aegis.com\/fr\/#website","url":"https:\/\/www.est-aegis.com\/fr\/","name":"Electro Static Technology","inLanguage":"fr-FR","publisher":{"@id":"https:\/\/www.est-aegis.com\/fr\/#organization"}}]},"og:locale":"fr_FR","og:site_name":"Electro Static Technology","og:type":"article","og:title":"Proper Grounding is Vital for Motors on Drives","og:description":"Proper grounding is important for all electric motors. It's especially important when using a drive, to protect motor &amp; equipment bearings.","og:url":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/","og:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/safety-ground-768x237-1.png","og:image:secure_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/safety-ground-768x237-1.png","og:image:width":768,"og:image:height":237,"article:published_time":"2022-01-19T14:20:00+00:00","article:modified_time":"2026-10-22T19:00:59+00:00","twitter:card":"summary_large_image","twitter:site":"@AEGIS_rings","twitter:title":"Proper Grounding is Vital for Motors on Drives","twitter:description":"Proper grounding is important for all electric motors. It's especially important when using a drive, to protect motor &amp; equipment bearings.","twitter:creator":"@AEGIS_rings","twitter:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/safety-ground-768x237-1.png","twitter:label1":"\u00c9crit par","twitter:data1":"AEGIS","twitter:label2":"Estimation du temps de lecture","twitter:data2":"4 minutes"},"aioseo_meta_data":{"post_id":"10178","title":"Proper Grounding is Vital for Motors on Drives","description":"Proper grounding is important for all electric motors. It's especially important when using a drive, to protect motor & equipment bearings.","keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"seo_analyzer_scan_date":"2026-10-28 18:28:36","breadcrumb_settings":null,"limit_modified_date":false,"reviewed_by":null,"open_ai":null,"ai":null,"created":"2026-10-22 16:14:05","updated":"2026-11-16 21:28:52","focus_keyword":null,"additional_keywords":null,"truseo_locale":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/fr\/\" title=\"Home\">Home<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/fr\/blog\/category\/bearing-damage-basics\/\" title=\"Bearing Damage Basics\">Bearing Damage Basics<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\tProper Grounding is Vital for Motors on Drives\n<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/www.est-aegis.com\/fr\/"},{"label":"Bearing Damage Basics","link":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/bearing-damage-basics\/"},{"label":"Proper Grounding is Vital for Motors on Drives","link":"https:\/\/www.est-aegis.com\/fr\/blog\/proper-grounding-is-vital-for-motors-on-drives\/"}],"jetpack_featured_media_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/safety-ground-768x237-1.png","_links":{"self":[{"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/posts\/10178","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/comments?post=10178"}],"version-history":[{"count":3,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/posts\/10178\/revisions"}],"predecessor-version":[{"id":10710,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/posts\/10178\/revisions\/10710"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/media\/1427"}],"wp:attachment":[{"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/media?parent=10178"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/categories?post=10178"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/tags?post=10178"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}