{"id":42,"date":"2025-07-09T09:30:00","date_gmt":"2025-07-09T13:30:00","guid":{"rendered":"https:\/\/www.est-aegis.com\/?p=42"},"modified":"2026-11-05T10:04:22","modified_gmt":"2026-11-05T15:04:22","slug":"detecting-bearing-current-other-methods","status":"publish","type":"post","link":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/","title":{"rendered":"Detecting Bearing Current: Other Methods"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">In our last post, we looked at how shaft voltage testing can be used to detect stray current arcing through motor bearings. In this post, we look at other methods of detecting bearing currents (or not).<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"alignright is-resized\"><img decoding=\"async\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/spark_emit.png\" alt=\"spark_emit\" style=\"width:300px;height:200px\"\/><\/figure>\n<\/div>\n\n\n<h3 class=\"wp-block-heading\">Electrical Discharge Detection<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">When current arcs through a dielectric \u2013 whether grease in a bearing, or air, or any other insulator \u2013 it produces a pulse of radio waves. This is how the first radio transmitters, <a href=\"https:\/\/en.wikipedia.org\/wiki\/Spark-gap_transmitter\" rel=\"noopener\" target=\"_blank\">spark gap transmitters<\/a>, worked. So in theory, you should be able to detect arcing through bearings by detecting RF pulses.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">And indeed you can. There is at least one electrical discharge detector on the market that uses this method. Testing is easy and nonintrusive. The device counts and reports the number of pulses detected, with the assumption that the more frequently discharge occurs, the sooner the bearing may fail. This assumption is not wrong, but it is limited \u2013 it ignores the fact that not all discharges are equally destructive. Counting pulses doesn\u2019t tell you anything about the amount of energy each discharge releases in the bearing (which shaft voltage testing does).<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But there is a bigger problem with these discharge detector pens: They assume that every detected burst came from a bearing discharge in the equipment being tested. In 2014, a large motor manufacturer did a field study that, among other things, compared discharge detector readings with shaft voltage measurements, which are known to be accurate. They found that the detector agreed with shaft voltage 63% of the time: In 22% of the comparisons, the detector correctly predicted discharge, and in 41%, it agreed that no discharge occurred. But 30% of the time, it predicted discharge when the scope showed none. So these detectors evidently have a problem with false positive results \u2013 so much so that a positive reading is more likely to be wrong than right!<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Common Mode Current Measurement<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">As we mentioned in our last post, it is impractical to directly measure bearing current in the field. So we recommend measuring shaft voltage, because it can unambiguously capture bearing discharge. Some consultants and manufacturers of VFDs and output filters recommend instead measuring <a href=\"\/three-types-of-bearing-current?hsLang=en-us\" rel=\"noopener\">common mode current<\/a> (CMC) as an alternative.\u00a0 Like common mode voltage, CMC changes too quickly to be measured with a multimeter.\u00a0It can only be measured with an oscilloscope and a current sensor called a <a href=\"https:\/\/en.wikipedia.org\/wiki\/Rogowski_coil\" rel=\"noopener\" target=\"_blank\">Rogowski coil<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">When you measure shaft voltage, it&rsquo;s easy to identify a discharge.\u00a0 But CMC includes <u>all<\/u> stray high frequency current through the motor. In small, properly grounded\/bonded motors, only a small fraction of this current goes through the bearings \u2013 Most passes into the stator frame and then to ground or back to the drive. Measuring CMC may be useful in assessing the <u>potential for<\/u> bearing currents, but it <u>cannot detect whether they are occurring<\/u>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This is shown the figure below, showing real data on CMC and shaft voltage levels. Notice the discharges shown in the shaft voltage \u2013 There is no hint in the CMC waveform that anything has happened. Simply put: <strong>Measuring common mode current cannot tell you whether a motor has bearing currents<\/strong>. Measuring CMC does have its uses, but detecting bearing current is not one of them, and as illustrated in the figure, <span style=\"text-decoration: underline;\">low CMC does not mean low risk<\/span> of shaft voltage discharge.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"alignright is-resized\"><img decoding=\"async\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/CB-current-voltage-not-a-jot.jpg\" alt=\"CB-current-voltage-not-a-jot\" style=\"width:1104px;height:541px\"\/><\/figure>\n<\/div>\n\n\n<h3 class=\"wp-block-heading\">Conclusion<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Shaft voltage testing is the gold standard of testing for bearing current.\u00a0 Discharge detection and common mode current measurements have their uses &#8211; both can be very helpful in measuring electrical noise (EMI\/RFI).\u00a0 But neither of them can show what shaft voltage measurement can: the unambiguous presence of electrical discharge in bearings, and a measure of how much damage those discharges can do.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">AEGIS Rings also come with a<span>\u00a0<\/span><a href=\"https:\/\/www.est-aegis.com\/product\/extended-warranty\/\" rel=\"noopener\" target=\"_blank\">2-year extended warranty<\/a><span>\u00a0<\/span>against bearing fluting damage. No other form of protection against VFD-caused bearing damage offers a warranty like this.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><span>To learn more about AEGIS shaft grounding and best practices for electrical bearing protection,<\/span><span>\u00a0<\/span><a href=\"https:\/\/www.est-aegis.com\/resources\/training\/\" rel=\"noopener\" target=\"_blank\">sign up for a training<\/a><span>. We offer monthly live training webinars, and\u00a0we can also visit your facility to review your exact application.<\/span><\/p>\n\n\n\n<div class=\"wp-block-buttons is-content-justification-center is-layout-flex wp-container-core-buttons-is-layout-fe48e5de wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/www.est-aegis.com\/resources\/training\/\">Sign Up For Training<\/a><\/div>\n<\/div>\n\n","protected":false},"excerpt":{"rendered":"<p>Part two in a series, on ways of assessing bearing currents in motors on drive: Electrical discharge detectors and common mode current measurement.<\/p>\n","protected":false},"author":7,"featured_media":1432,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"content-type":"","_relevanssi_hide_post":"","_relevanssi_hide_content":"","_relevanssi_pin_for_all":"","_relevanssi_pin_keywords":"","_relevanssi_unpin_keywords":"","_relevanssi_related_keywords":"","_relevanssi_related_include_ids":"","_relevanssi_related_exclude_ids":"","_relevanssi_related_no_append":"","_relevanssi_related_not_related":"","_relevanssi_related_posts":"","_relevanssi_noindex_reason":"","footnotes":""},"categories":[1070],"tags":[],"class_list":["post-42","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-diagnosing-and-testing"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO Pro 5.0.5.1 - aioseo.com -->\n\t<meta name=\"description\" content=\"Part two in a series, on ways of assessing bearing currents in motors on drive: Electrical discharge detectors and common mode current measurement.\" \/>\n\t<meta name=\"robots\" content=\"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n\t<meta name=\"author\" content=\"AEGIS\"\/>\n\t<link rel=\"canonical\" href=\"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/\" \/>\n\t\t<meta name=\"generator\" content=\"All in One SEO Pro (AIOSEO) 5.0.5.1\" \/>\n\t\t<meta property=\"og:locale\" content=\"fr_FR\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Electro Static Technology\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Why Shaft Voltage Testing Beats Discharge Detection\" \/>\n\t\t<meta property=\"og:description\" content=\"Part two in a series, on ways of assessing bearing currents in motors on drive: Electrical discharge detectors and common mode current measurement.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/spark_emit-scaled.png\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/spark_emit-scaled.png\" \/>\n\t\t<meta property=\"og:image:width\" content=\"2560\" \/>\n\t\t<meta property=\"og:image:height\" content=\"1703\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2025-07-09T13:30:00+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-11-05T15:04:22+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:site\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Why Shaft Voltage Testing Beats Discharge Detection\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Part two in a series, on ways of assessing bearing currents in motors on drive: Electrical discharge detectors and common mode current measurement.\" \/>\n\t\t<meta name=\"twitter:creator\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/spark_emit-scaled.png\" \/>\n\t\t<meta name=\"twitter:label1\" content=\"\u00c9crit par\" \/>\n\t\t<meta name=\"twitter:data1\" content=\"AEGIS\" \/>\n\t\t<meta name=\"twitter:label2\" content=\"Estimation du temps de lecture\" \/>\n\t\t<meta name=\"twitter:data2\" content=\"3 minutes\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-other-methods\\\/#article\",\"name\":\"Why Shaft Voltage Testing Beats Discharge Detection\",\"headline\":\"Detecting Bearing Current: Other Methods\",\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/#author\"},\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#organization\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/spark_emit-scaled.png\",\"width\":2560,\"height\":1703,\"caption\":\"#image_title\"},\"datePublished\":\"2025-07-09T09:30:00-04:00\",\"dateModified\":\"2026-11-05T10:04:22-05:00\",\"inLanguage\":\"fr-FR\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-other-methods\\\/#webpage\"},\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-other-methods\\\/#webpage\"},\"articleSection\":\"Diagnosing &amp; Testing, Optional\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-other-methods\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/category\\\/diagnosing-and-testing\\\/#listItem\",\"name\":\"Diagnosing &amp; Testing\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/category\\\/diagnosing-and-testing\\\/#listItem\",\"position\":2,\"name\":\"Diagnosing &amp; Testing\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/category\\\/diagnosing-and-testing\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-other-methods\\\/#listItem\",\"name\":\"Detecting Bearing Current: Other Methods\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-other-methods\\\/#listItem\",\"position\":3,\"name\":\"Detecting Bearing Current: Other Methods\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/category\\\/diagnosing-and-testing\\\/#listItem\",\"name\":\"Diagnosing &amp; Testing\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#organization\",\"name\":\"Electro Static Technology\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/logo-aegis-1.svg\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-other-methods\\\/#organizationLogo\",\"width\":244,\"height\":73,\"caption\":\"aegis logo\"},\"image\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-other-methods\\\/#organizationLogo\"},\"sameAs\":[\"https:\\\/\\\/x.com\\\/AEGIS_rings\"],\"address\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#postaladdress\",\"@type\":\"PostalAddress\",\"streetAddress\":\"31 Winterbrook Road\",\"postalCode\":\"04256\",\"addressLocality\":\"Mechanic Falls\",\"addressRegion\":\"ME\",\"addressCountry\":\"US\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/#author\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/\",\"name\":\"AEGIS\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-other-methods\\\/#authorImage\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g\",\"width\":96,\"height\":96,\"caption\":\"AEGIS\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-other-methods\\\/#webpage\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-other-methods\\\/\",\"name\":\"Why Shaft Voltage Testing Beats Discharge Detection\",\"description\":\"Part two in a series, on ways of assessing bearing currents in motors on drive: Electrical discharge detectors and common mode current measurement.\",\"inLanguage\":\"fr-FR\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-other-methods\\\/#breadcrumblist\"},\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/#author\"},\"creator\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/#author\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/spark_emit-scaled.png\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-other-methods\\\/#mainImage\",\"width\":2560,\"height\":1703,\"caption\":\"#image_title\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-other-methods\\\/#mainImage\"},\"datePublished\":\"2025-07-09T09:30:00-04:00\",\"dateModified\":\"2026-11-05T10:04:22-05:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#website\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/\",\"name\":\"Electro Static Technology\",\"inLanguage\":\"fr-FR\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO Pro -->\r\n\t\t<title>Why Shaft Voltage Testing Beats Discharge Detection<\/title>\n\n","aioseo_head_json":{"title":"Why Shaft Voltage Testing Beats Discharge Detection","description":"Part two in a series, on ways of assessing bearing currents in motors on drive: Electrical discharge detectors and common mode current measurement.","canonical_url":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/","robots":"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/#article","name":"Why Shaft Voltage Testing Beats Discharge Detection","headline":"Detecting Bearing Current: Other Methods","author":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/#author"},"publisher":{"@id":"https:\/\/www.est-aegis.com\/fr\/#organization"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/spark_emit-scaled.png","width":2560,"height":1703,"caption":"#image_title"},"datePublished":"2025-07-09T09:30:00-04:00","dateModified":"2026-11-05T10:04:22-05:00","inLanguage":"fr-FR","mainEntityOfPage":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/#webpage"},"isPartOf":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/#webpage"},"articleSection":"Diagnosing &amp; Testing, Optional"},{"@type":"BreadcrumbList","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/#listItem","position":1,"name":"Home","item":"https:\/\/www.est-aegis.com\/fr\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/diagnosing-and-testing\/#listItem","name":"Diagnosing &amp; Testing"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/diagnosing-and-testing\/#listItem","position":2,"name":"Diagnosing &amp; Testing","item":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/diagnosing-and-testing\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/#listItem","name":"Detecting Bearing Current: Other Methods"},"previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/#listItem","position":3,"name":"Detecting Bearing Current: Other Methods","previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/diagnosing-and-testing\/#listItem","name":"Diagnosing &amp; Testing"}}]},{"@type":"Organization","@id":"https:\/\/www.est-aegis.com\/fr\/#organization","name":"Electro Static Technology","url":"https:\/\/www.est-aegis.com\/fr\/","logo":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/logo-aegis-1.svg","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/#organizationLogo","width":244,"height":73,"caption":"aegis logo"},"image":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/#organizationLogo"},"sameAs":["https:\/\/x.com\/AEGIS_rings"],"address":{"@id":"https:\/\/www.est-aegis.com\/fr\/#postaladdress","@type":"PostalAddress","streetAddress":"31 Winterbrook Road","postalCode":"04256","addressLocality":"Mechanic Falls","addressRegion":"ME","addressCountry":"US"}},{"@type":"Person","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/#author","url":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/","name":"AEGIS","image":{"@type":"ImageObject","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/#authorImage","url":"https:\/\/secure.gravatar.com\/avatar\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g","width":96,"height":96,"caption":"AEGIS"}},{"@type":"WebPage","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/#webpage","url":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/","name":"Why Shaft Voltage Testing Beats Discharge Detection","description":"Part two in a series, on ways of assessing bearing currents in motors on drive: Electrical discharge detectors and common mode current measurement.","inLanguage":"fr-FR","isPartOf":{"@id":"https:\/\/www.est-aegis.com\/fr\/#website"},"breadcrumb":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/#breadcrumblist"},"author":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/#author"},"creator":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/#author"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/spark_emit-scaled.png","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/#mainImage","width":2560,"height":1703,"caption":"#image_title"},"primaryImageOfPage":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/#mainImage"},"datePublished":"2025-07-09T09:30:00-04:00","dateModified":"2026-11-05T10:04:22-05:00"},{"@type":"WebSite","@id":"https:\/\/www.est-aegis.com\/fr\/#website","url":"https:\/\/www.est-aegis.com\/fr\/","name":"Electro Static Technology","inLanguage":"fr-FR","publisher":{"@id":"https:\/\/www.est-aegis.com\/fr\/#organization"}}]},"og:locale":"fr_FR","og:site_name":"Electro Static Technology","og:type":"article","og:title":"Why Shaft Voltage Testing Beats Discharge Detection","og:description":"Part two in a series, on ways of assessing bearing currents in motors on drive: Electrical discharge detectors and common mode current measurement.","og:url":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/","og:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/spark_emit-scaled.png","og:image:secure_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/spark_emit-scaled.png","og:image:width":2560,"og:image:height":1703,"article:published_time":"2025-07-09T13:30:00+00:00","article:modified_time":"2026-11-05T15:04:22+00:00","twitter:card":"summary_large_image","twitter:site":"@AEGIS_rings","twitter:title":"Why Shaft Voltage Testing Beats Discharge Detection","twitter:description":"Part two in a series, on ways of assessing bearing currents in motors on drive: Electrical discharge detectors and common mode current measurement.","twitter:creator":"@AEGIS_rings","twitter:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/spark_emit-scaled.png","twitter:label1":"\u00c9crit par","twitter:data1":"AEGIS","twitter:label2":"Estimation du temps de lecture","twitter:data2":"3 minutes"},"aioseo_meta_data":{"post_id":"42","title":"Why Shaft Voltage Testing Beats Discharge Detection","description":"Part two in a series, on ways of assessing bearing currents in motors on drive: Electrical discharge detectors and common mode current measurement.","keywords":null,"keyphrases":{"focus":[],"additional":[]},"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"seo_analyzer_scan_date":"2026-11-05 15:30:47","breadcrumb_settings":null,"limit_modified_date":false,"reviewed_by":null,"open_ai":null,"ai":null,"created":"2026-10-22 16:13:39","updated":"2026-11-16 20:15:22","focus_keyword":null,"additional_keywords":null,"truseo_locale":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/fr\/\" title=\"Home\">Home<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/fr\/blog\/category\/diagnosing-and-testing\/\" title=\"Diagnosing &amp; Testing\">Diagnosing &amp; Testing<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\tDetecting Bearing Current: Other Methods\n<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/www.est-aegis.com\/fr\/"},{"label":"Diagnosing &amp; Testing","link":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/diagnosing-and-testing\/"},{"label":"Detecting Bearing Current: Other Methods","link":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-other-methods\/"}],"jetpack_featured_media_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/spark_emit-scaled.png","_links":{"self":[{"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/posts\/42","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/comments?post=42"}],"version-history":[{"count":4,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/posts\/42\/revisions"}],"predecessor-version":[{"id":10779,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/posts\/42\/revisions\/10779"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/media\/1432"}],"wp:attachment":[{"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/media?parent=42"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/categories?post=42"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/tags?post=42"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}