{"id":43,"date":"2025-06-30T14:10:47","date_gmt":"2025-06-30T18:10:47","guid":{"rendered":"https:\/\/www.est-aegis.com\/?p=43"},"modified":"2026-10-22T15:00:36","modified_gmt":"2026-10-22T19:00:36","slug":"detecting-bearing-current-with-shaft-voltage-testing","status":"publish","type":"post","link":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/","title":{"rendered":"Detecting Bearing Current with Shaft Voltage Testing"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Electric motors controlled by drives are at risk of destructive bearing currents causing premature bearing failure. No one argues this, but opinions vary on how to assess that risk \u2013 What can you do, what can you <em>measure<\/em>, to find out whether a motor is at risk of premature failure? In this two part series, we\u2019ll look at the options.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Bearing Current and Bearing Voltage<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Unfortunately, you can\u2019t directly measure bearing current in the field. Measuring it requires special equipment and serious alterations to the motor, and is unfeasible outside a research lab. You could measure bearing voltage instead: Whenever current arcs through a bearing, the voltage (electric potential difference) across the bearing suddenly drops. By \u201csuddenly,\u201d we mean over the course of under 20 nanoseconds. For comparison, modern drives have switching speeds between tens and hundreds of nanoseconds (see figure).<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><img loading=\"lazy\" decoding=\"async\" class=\"alignright\" alt=\"cmv-vs-disch-2us\" height=\"451\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/cmv-vs-disch-2us.png\" title=\"Speeds of VFD switching (top) and shaft voltage discharge(bottom).  Both have the same timescale (0.2 us\/div).  The VFD voltage slopes up over ~100 ns, while the shaft voltage falls vertically.\" width=\"300\">Unfortunately, it\u2019s also impractical to directly measure bearing voltage. So what <u>can<\/u> you measure?<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Measuring Shaft Voltage<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The shaft voltage \u2013 between the motor shaft and frame \u2013 is an excellent measure of the bearing voltage, because the shaft is in metal-metal contact with the inner bearing race, and the frame contacts the outer race. And luckily, it can be easily measured with an oscilloscope. The shaft voltage changes too rapidly to be accurately measured by a multimeter \u2013 we recommend a scope with at least 100 MHz bandwidth.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">When a shaft voltage reading shows a relatively slow buildup and then a sudden collapse, that is the smoking gun for capacitive discharge bearing current, or EDM current, which occurs when the rotor first gets capacitively charged by the common mode voltage in the motor windings, and then discharges through a bearing.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">The Damage Done<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">You can even compare the damage done by discharges with shaft voltage readings. The energy stored in a capacitor is<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">E = \u00bd CV<sup>2<\/sup>,<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">where C is the bearing\u2019s capacitance and V is the shaft voltage when the discharge occurs. This equation says that a discharge at 20V releases four times as much energy as a discharge at 10V.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Most of this energy is released into the bearing as heat, and although the amount of energy in one discharge is small, it is released across a tiny area. That small area heats up to thousands of degrees \u2013 hot enough to melt steel and create the microscopic pits that are the hallmark of bearing current damage.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full is-resized\"><img decoding=\"async\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/pitting-frosting-fluting-horz.png\" alt=\"pitting-frosting-fluting-horz\" style=\"width:3693px\"\/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Detecting Other Bearing Currents<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">EDM current is a risk for all unprotected motors on VFDs. There are two other <a href=\"\/three-types-of-bearing-current?hsLang=en-us\" rel=\"noopener\">drive-induced bearing currents<\/a>, with different mechanisms, but they can also be detected by shaft voltage measurements. These other bearing currents are more destructive, because they can flow continuously after the first arc, whereas shaft voltage discharge current only arcs once and then stops until the rotor gets capacitively recharged.<img loading=\"lazy\" decoding=\"async\" class=\"alignright\" alt=\"v-shaft-hfcc-gunnar-bigger\" height=\"250\" src=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/v-shaft-hfcc-gunnar-bigger.png\" width=\"300\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Rotor ground current, in motors without good high frequency bonding to the drive, can be detected by measuring the shaft voltage at one end. And high frequency circulating current, in larger motors (over 100 hp\/75 kW), can be detected by simultaneously measuring shaft voltage at both ends of the motor, as shown in the figure at the right.\u00a0 The shaft voltage goes negative at one end (top), and positive at the other.\u00a0 At 2 divisions from the left, the voltage at the negative end arcs through the bearing and returns to zero, but the voltage at the opposite end remains positive.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">The Bottom Line<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Measuring shaft voltage and examining the waveform will tell you whether current is arcing through the bearings. In Part Two, we will look at two other methods of assessing bearing current in motors on drives, and see how they compare to shaft voltage testing.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">AEGIS Rings also come with a<span>\u00a0<\/span><a href=\"https:\/\/www.est-aegis.com\/product\/extended-warranty\/\" rel=\"noopener\" target=\"_blank\">2-year extended warranty<\/a><span>\u00a0<\/span>against bearing fluting damage. No other form of protection against VFD-caused bearing damage offers a warranty like this.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><span>To learn more about AEGIS shaft grounding and best practices for electrical bearing protection,<\/span><span>\u00a0<\/span><a href=\"https:\/\/www.est-aegis.com\/resources\/training\/\" rel=\"noopener\" target=\"_blank\">sign up for a training<\/a><span>. We offer monthly live training webinars, and\u00a0we can also visit your facility to review your exact application.<\/span><\/p>\n\n\n\n<div class=\"wp-block-buttons is-content-justification-center is-layout-flex wp-container-core-buttons-is-layout-fe48e5de wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/www.est-aegis.com\/resources\/training\/\">Sign Up For Training<\/a><\/div>\n<\/div>\n\n","protected":false},"excerpt":{"rendered":"<p>In this series, we look at ways of assessing destructive bearing currents in motors on drives.  In Part One:  Shaft Voltage Testing.<\/p>\n","protected":false},"author":7,"featured_media":9862,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"content-type":"","_relevanssi_hide_post":"","_relevanssi_hide_content":"","_relevanssi_pin_for_all":"","_relevanssi_pin_keywords":"","_relevanssi_unpin_keywords":"","_relevanssi_related_keywords":"","_relevanssi_related_include_ids":"","_relevanssi_related_exclude_ids":"","_relevanssi_related_no_append":"","_relevanssi_related_not_related":"","_relevanssi_related_posts":"","_relevanssi_noindex_reason":"","footnotes":""},"categories":[1070],"tags":[],"class_list":["post-43","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-diagnosing-and-testing"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO Pro 5.0.5.1 - aioseo.com -->\n\t<meta name=\"description\" content=\"In this series, we look at ways of assessing destructive bearing currents in motors on drives. In Part One: Shaft Voltage Testing.\" \/>\n\t<meta name=\"robots\" content=\"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n\t<meta name=\"author\" content=\"AEGIS\"\/>\n\t<link rel=\"canonical\" href=\"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/\" \/>\n\t\t<meta name=\"generator\" content=\"All in One SEO Pro (AIOSEO) 5.0.5.1\" \/>\n\t\t<meta property=\"og:locale\" content=\"fr_FR\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Electro Static Technology\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"How to Detect Bearing Current with Shaft Voltage Testing\" \/>\n\t\t<meta property=\"og:description\" content=\"In this series, we look at ways of assessing destructive bearing currents in motors on drives. In Part One: Shaft Voltage Testing.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/cmv-vs-disch-2us.png\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/cmv-vs-disch-2us.png\" \/>\n\t\t<meta property=\"og:image:width\" content=\"327\" \/>\n\t\t<meta property=\"og:image:height\" content=\"492\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2025-06-30T18:10:47+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-10-22T19:00:36+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:site\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:title\" content=\"How to Detect Bearing Current with Shaft Voltage Testing\" \/>\n\t\t<meta name=\"twitter:description\" content=\"In this series, we look at ways of assessing destructive bearing currents in motors on drives. In Part One: Shaft Voltage Testing.\" \/>\n\t\t<meta name=\"twitter:creator\" content=\"@AEGIS_rings\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/www.est-aegis.com\/wp-content\/uploads\/cmv-vs-disch-2us.png\" \/>\n\t\t<meta name=\"twitter:label1\" content=\"\u00c9crit par\" \/>\n\t\t<meta name=\"twitter:data1\" content=\"AEGIS\" \/>\n\t\t<meta name=\"twitter:label2\" content=\"Estimation du temps de lecture\" \/>\n\t\t<meta name=\"twitter:data2\" content=\"3 minutes\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-with-shaft-voltage-testing\\\/#article\",\"name\":\"How to Detect Bearing Current with Shaft Voltage Testing\",\"headline\":\"Detecting Bearing Current with Shaft Voltage Testing\",\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/#author\"},\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#organization\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/cmv-vs-disch-2us.png\",\"width\":327,\"height\":492,\"caption\":\"#image_title\"},\"datePublished\":\"2025-06-30T14:10:47-04:00\",\"dateModified\":\"2026-10-22T15:00:36-04:00\",\"inLanguage\":\"fr-FR\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-with-shaft-voltage-testing\\\/#webpage\"},\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-with-shaft-voltage-testing\\\/#webpage\"},\"articleSection\":\"Diagnosing &amp; Testing, Optional\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-with-shaft-voltage-testing\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/category\\\/diagnosing-and-testing\\\/#listItem\",\"name\":\"Diagnosing &amp; Testing\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/category\\\/diagnosing-and-testing\\\/#listItem\",\"position\":2,\"name\":\"Diagnosing &amp; Testing\",\"item\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/category\\\/diagnosing-and-testing\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-with-shaft-voltage-testing\\\/#listItem\",\"name\":\"Detecting Bearing Current with Shaft Voltage Testing\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-with-shaft-voltage-testing\\\/#listItem\",\"position\":3,\"name\":\"Detecting Bearing Current with Shaft Voltage Testing\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/category\\\/diagnosing-and-testing\\\/#listItem\",\"name\":\"Diagnosing &amp; Testing\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#organization\",\"name\":\"Electro Static Technology\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/logo-aegis-1.svg\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-with-shaft-voltage-testing\\\/#organizationLogo\",\"width\":244,\"height\":73,\"caption\":\"aegis logo\"},\"image\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-with-shaft-voltage-testing\\\/#organizationLogo\"},\"sameAs\":[\"https:\\\/\\\/x.com\\\/AEGIS_rings\"],\"address\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#postaladdress\",\"@type\":\"PostalAddress\",\"streetAddress\":\"31 Winterbrook Road\",\"postalCode\":\"04256\",\"addressLocality\":\"Mechanic Falls\",\"addressRegion\":\"ME\",\"addressCountry\":\"US\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/#author\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/\",\"name\":\"AEGIS\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-with-shaft-voltage-testing\\\/#authorImage\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g\",\"width\":96,\"height\":96,\"caption\":\"AEGIS\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-with-shaft-voltage-testing\\\/#webpage\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-with-shaft-voltage-testing\\\/\",\"name\":\"How to Detect Bearing Current with Shaft Voltage Testing\",\"description\":\"In this series, we look at ways of assessing destructive bearing currents in motors on drives. In Part One: Shaft Voltage Testing.\",\"inLanguage\":\"fr-FR\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-with-shaft-voltage-testing\\\/#breadcrumblist\"},\"author\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/#author\"},\"creator\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/author\\\/aegis\\\/#author\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/wp-content\\\/uploads\\\/cmv-vs-disch-2us.png\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-with-shaft-voltage-testing\\\/#mainImage\",\"width\":327,\"height\":492,\"caption\":\"#image_title\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/blog\\\/detecting-bearing-current-with-shaft-voltage-testing\\\/#mainImage\"},\"datePublished\":\"2025-06-30T14:10:47-04:00\",\"dateModified\":\"2026-10-22T15:00:36-04:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#website\",\"url\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/\",\"name\":\"Electro Static Technology\",\"inLanguage\":\"fr-FR\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.est-aegis.com\\\/fr\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO Pro -->\r\n\t\t<title>How to Detect Bearing Current with Shaft Voltage Testing<\/title>\n\n","aioseo_head_json":{"title":"How to Detect Bearing Current with Shaft Voltage Testing","description":"In this series, we look at ways of assessing destructive bearing currents in motors on drives. In Part One: Shaft Voltage Testing.","canonical_url":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/","robots":"noindex, max-snippet:-1, max-image-preview:large, max-video-preview:-1","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/#article","name":"How to Detect Bearing Current with Shaft Voltage Testing","headline":"Detecting Bearing Current with Shaft Voltage Testing","author":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/#author"},"publisher":{"@id":"https:\/\/www.est-aegis.com\/fr\/#organization"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/cmv-vs-disch-2us.png","width":327,"height":492,"caption":"#image_title"},"datePublished":"2025-06-30T14:10:47-04:00","dateModified":"2026-10-22T15:00:36-04:00","inLanguage":"fr-FR","mainEntityOfPage":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/#webpage"},"isPartOf":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/#webpage"},"articleSection":"Diagnosing &amp; Testing, Optional"},{"@type":"BreadcrumbList","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/#listItem","position":1,"name":"Home","item":"https:\/\/www.est-aegis.com\/fr\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/diagnosing-and-testing\/#listItem","name":"Diagnosing &amp; Testing"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/diagnosing-and-testing\/#listItem","position":2,"name":"Diagnosing &amp; Testing","item":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/diagnosing-and-testing\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/#listItem","name":"Detecting Bearing Current with Shaft Voltage Testing"},"previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/#listItem","position":3,"name":"Detecting Bearing Current with Shaft Voltage Testing","previousItem":{"@type":"ListItem","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/diagnosing-and-testing\/#listItem","name":"Diagnosing &amp; Testing"}}]},{"@type":"Organization","@id":"https:\/\/www.est-aegis.com\/fr\/#organization","name":"Electro Static Technology","url":"https:\/\/www.est-aegis.com\/fr\/","logo":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/logo-aegis-1.svg","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/#organizationLogo","width":244,"height":73,"caption":"aegis logo"},"image":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/#organizationLogo"},"sameAs":["https:\/\/x.com\/AEGIS_rings"],"address":{"@id":"https:\/\/www.est-aegis.com\/fr\/#postaladdress","@type":"PostalAddress","streetAddress":"31 Winterbrook Road","postalCode":"04256","addressLocality":"Mechanic Falls","addressRegion":"ME","addressCountry":"US"}},{"@type":"Person","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/#author","url":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/","name":"AEGIS","image":{"@type":"ImageObject","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/#authorImage","url":"https:\/\/secure.gravatar.com\/avatar\/8df5575541df78c551aa899db7bd2ee11bed27caea7dcd8c7695af230c7c1a04?s=96&d=mm&r=g","width":96,"height":96,"caption":"AEGIS"}},{"@type":"WebPage","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/#webpage","url":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/","name":"How to Detect Bearing Current with Shaft Voltage Testing","description":"In this series, we look at ways of assessing destructive bearing currents in motors on drives. In Part One: Shaft Voltage Testing.","inLanguage":"fr-FR","isPartOf":{"@id":"https:\/\/www.est-aegis.com\/fr\/#website"},"breadcrumb":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/#breadcrumblist"},"author":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/#author"},"creator":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/author\/aegis\/#author"},"image":{"@type":"ImageObject","url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/cmv-vs-disch-2us.png","@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/#mainImage","width":327,"height":492,"caption":"#image_title"},"primaryImageOfPage":{"@id":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/#mainImage"},"datePublished":"2025-06-30T14:10:47-04:00","dateModified":"2026-10-22T15:00:36-04:00"},{"@type":"WebSite","@id":"https:\/\/www.est-aegis.com\/fr\/#website","url":"https:\/\/www.est-aegis.com\/fr\/","name":"Electro Static Technology","inLanguage":"fr-FR","publisher":{"@id":"https:\/\/www.est-aegis.com\/fr\/#organization"}}]},"og:locale":"fr_FR","og:site_name":"Electro Static Technology","og:type":"article","og:title":"How to Detect Bearing Current with Shaft Voltage Testing","og:description":"In this series, we look at ways of assessing destructive bearing currents in motors on drives. In Part One: Shaft Voltage Testing.","og:url":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/","og:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/cmv-vs-disch-2us.png","og:image:secure_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/cmv-vs-disch-2us.png","og:image:width":327,"og:image:height":492,"article:published_time":"2025-06-30T18:10:47+00:00","article:modified_time":"2026-10-22T19:00:36+00:00","twitter:card":"summary_large_image","twitter:site":"@AEGIS_rings","twitter:title":"How to Detect Bearing Current with Shaft Voltage Testing","twitter:description":"In this series, we look at ways of assessing destructive bearing currents in motors on drives. In Part One: Shaft Voltage Testing.","twitter:creator":"@AEGIS_rings","twitter:image":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/cmv-vs-disch-2us.png","twitter:label1":"\u00c9crit par","twitter:data1":"AEGIS","twitter:label2":"Estimation du temps de lecture","twitter:data2":"3 minutes"},"aioseo_meta_data":{"post_id":"43","title":"How to Detect Bearing Current with Shaft Voltage Testing","description":"In this series, we look at ways of assessing destructive bearing currents in motors on drives. In Part One: Shaft Voltage Testing.","keywords":null,"keyphrases":{"focus":[],"additional":[]},"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"seo_analyzer_scan_date":"2026-11-04 18:53:43","breadcrumb_settings":null,"limit_modified_date":false,"reviewed_by":null,"open_ai":null,"ai":null,"created":"2026-10-22 16:13:40","updated":"2026-11-16 20:15:22","focus_keyword":null,"additional_keywords":null,"truseo_locale":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/fr\/\" title=\"Home\">Home<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t<a href=\"https:\/\/www.est-aegis.com\/fr\/blog\/category\/diagnosing-and-testing\/\" title=\"Diagnosing &amp; Testing\">Diagnosing &amp; Testing<\/a>\n<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\tDetecting Bearing Current with Shaft Voltage Testing\n<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/www.est-aegis.com\/fr\/"},{"label":"Diagnosing &amp; Testing","link":"https:\/\/www.est-aegis.com\/fr\/blog\/category\/diagnosing-and-testing\/"},{"label":"Detecting Bearing Current with Shaft Voltage Testing","link":"https:\/\/www.est-aegis.com\/fr\/blog\/detecting-bearing-current-with-shaft-voltage-testing\/"}],"jetpack_featured_media_url":"https:\/\/www.est-aegis.com\/wp-content\/uploads\/cmv-vs-disch-2us.png","_links":{"self":[{"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/posts\/43","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/comments?post=43"}],"version-history":[{"count":3,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/posts\/43\/revisions"}],"predecessor-version":[{"id":10643,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/posts\/43\/revisions\/10643"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/media\/9862"}],"wp:attachment":[{"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/media?parent=43"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/categories?post=43"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.est-aegis.com\/fr\/wp-json\/wp\/v2\/tags?post=43"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}