Auteur/autrice : AEGIS
Specify VFDs for Energy Savings, and Grounding Rings for Motor Reliability

VDFs Save Energy
Controlling motors with variable frequency drives allows the motors to run at reduced speed. This can save huge amounts of energy in HVAC and other variable speed applications.
…But Damage Motors
VFDs’ pulsed output voltage is not balanced. Imbalanced input voltage induces a capacitive voltage on the motor shaft. The shaft voltage can discharge through the motor bearings, causing cumulative damage and often premature failure. The energy savings from VFD control can be wiped out by repeated motor failures.
Shaft Grounding
AEGIS® Shaft Grounding Rings electrically bond the motor shaft to the frame. Shaft voltage bleeds off through the ring instead of arcing through the bearings. Specifying AEGIS rings for motors on drives can lock in clients’ savings and help secure their loyalty.

Learn More
Here are some resources on the problem of VFD-sourced bearing currents and how to specify AEGIS to protect against them.
Resources:
WEG Class I Division 2-certifiable Motors with AEGIS
Most motors controlled by variable frequency drives (VFDs) are subject to electrical bearing damage by shaft voltage discharge. The risk of premature bearing failure can be mitigated by shaft grounding, but this is problematic in hazardous (classified) environments where potentially explosive gases may be present.
Background
Installing motor shaft grounding in hazardous areas has always been tricky because shaft grounding devices are considered “sparking” devices. In 2014, Underwriters Laboratory approved procedures for installing shaft grounding rings in explosion-proof (XP) motors for Class I, Division 1 areas. There are similar procedures for Ex/ATEX motors. The shaft grounding device is installed outside the motor flame path in both cases.
It was only in the early ’20s that changes in electrical codes and IEEE standards opened the way to use shaft grounding on (non-XP) motors in Class I, Division 2 areas. The catch is that first, so-called non-incendivity calculations must be performed to determine that the shaft grounding device spark energy will not ignite the gases in the classified area. The measurements required for these calculations are beyond many motor users’ means, and until mid-2024, no motor manufacturers had yet confirmed that their products could be certified for Class I, Division 2.
WEG W22 Motors Can Now Be Certified

In July 2024, WEG Electric Corp. announced that their entire W22 line of cast iron motors has been evaluated by CSA Group to satisfy both the IEEE-1349 discharge energy calculation and IEC 60079-0 standard. That means these motors can be equipped with shaft grounding and used in Class I & Class II Division 2 areas. They can be purchased with AEGIS® Shaft Grounding Rings factory installed and installed without the user needing to do any calculations.
In a word, it just got a whole lot easier to protect motors in hazardous areas from electrical bearing damage. As a bonus, the W22 line also includes IEEE-841 Std motors. 841 motors are some of the most robust and reliable motors there are, and some motor users use 841 motors throughout their facilities just to be sure they’re using the best available. With AEGIS rings installed, these motors will be even more reliable.
AEGIS rings also come with a 2-year extended warranty against bearing fluting damage. No other form of shaft grounding comes with a warranty like this.
To learn more about AEGIS shaft grounding and best practices for electrical bearing protection, sign up for a training. We offer monthly live training webinars, and we can also visit your facility to review your exact application.
Preserving HVAC Systems by Safeguarding Against Bearing Damage
Variable Frequency Drives (VFDs) are essential for modern HVAC systems, but they produce harmful motor shaft voltage, leading to electrical bearing damage. Protecting your motors from this hidden threat safeguards your equipment and enables uninterrupted operation.
Understanding VFDs in HVAC Systems
VFDs adjust the speed of motors that drive fans, pumps, and compressors. By running motors only as fast as needed, VFD HVAC systems can achieve significant energy savings—often between 20% and 30%.
A VFD in HVAC delivers multiple benefits but also comes with unique challenges. For instance, VFDs induce harmful shaft voltage, leading to electrical bearing damage in the motors they control.
The Threat of Shaft Voltage
Shaft voltage poses a significant risk to HVAC motors. When a motor is controlled by a drive, a voltage builds up between the rotor and stator. If left unchecked, this so-called shaft voltage discharges through the motor bearings, causing electrical discharge machining (EDM). This discharge results in pitting, frosting, and fluting, and eventually, complete bearing failure.
Electrical bearing damage compromises the reliability of HVAC systems, and premature bearing failure causes expensive downtime and incurs additional costs for motor replacement (small motors) or repair (larger motors). Addressing shaft voltage is essential for preserving the health and functionality of your motors.
The Role of AEGIS® Shaft Grounding Rings
AEGIS® Shaft Grounding Rings protect HVAC motors from damaging shaft voltage discharge. These rings offer a reliable path for electrical currents to bypass the motor bearings, safeguarding them from EDM.
AEGIS® Rings are mounted around the motor shaft, with their conductive microfibers creating a continuous, 360-degree contact. This design safely diverts harmful current from the shaft, preventing bearing damage. By incorporating these grounding rings, you can mitigate the risks associated with VFD use, helping ensure your HVAC systems’ long-term success and efficiency.
Benefits of AEGIS® Shaft Grounding Rings
AEGIS® Shaft Grounding Rings offer numerous benefits that make them indispensable for preserving HVAC systems:
- 360-Degree Coverage: The unique design creates a continuous, 360-degree circumferential contact, offering unmatched grounding performance.
- Durability: Engineered with conductive microfibers that flex without breaking, these rings are lab-tested to last over 200,000 hours of continuous operation.
- Versatility: Suitable for a variety of motors, including those used in HVAC systems, ensuring broad applicability and ease of integration.
- Cost Savings: Preventing bearing damage reduces maintenance costs and eliminates the need for frequent motor replacements, offering long-term financial benefits.
Incorporating AEGIS® Shaft Grounding Rings into your HVAC motors protects against the harmful effects of shaft voltage, and maintains systems’ overall efficiency and reliability.
Secure Your HVAC System’s Future
Protecting HVAC systems from electrical bearing damage is crucial for their long-term success. AEGIS® Shaft Grounding Rings are a reliable solution, preventing shaft voltage from wreaking havoc on your motors. By investing in these rings, you secure the efficiency and durability of your HVAC system and lock in the energy savings that VFDs offer.
Ready to safeguard your equipment? Find a local distributor or trained installer to get started, or contact us today to learn more about how AEGIS® Shaft Grounding Rings can benefit your operations.
AEGIS rings also come with a 2-year extended warranty against bearing fluting damage. No other form of shaft grounding comes with a warranty like this.
To learn more about AEGIS shaft grounding and best practices for electrical bearing protection, sign up for a training. We offer monthly live training webinars, and we can also visit your facility to review your exact application.
How AEGIS Shaft Grounding Rings Reduce Risk in Electric Motor Systems
Electric motor systems are the backbone of countless industries, from manufacturing to utilities. Ensuring the motors run efficiently and reliably minimizes electricity use and unplanned downtime and increases productivity. However, all motors have some risk of premature failure, such as electrical bearing damage caused by variable frequency drives (VFDs). This is where AEGIS®️ Shaft Grounding Rings come into play. These innovative rings effectively protect at-risk motor bearings, decreasing the total risk of premature motor system failure.
Understanding the Role of AEGIS Shaft Grounding Rings
Electric motors are vital to practically all industries. AC induction motors are robust machines, but details of their installation create various problems that can impact their performance and longevity.
The Challenge: Electrical Damage in Motor Bearings
Electric motors powered by VFDs often suffer from electrical bearing damage due to shaft voltage. This voltage can discharge through bearings, causing damage that often leads to premature failure, significant downtime costs, and repair/replacement costs. The root cause is that VFDs output imbalanced voltage; the only way to prevent this is with very expensive all-pole sine filters. There are more cost-effective solutions.
The Solution: Effective Shaft Grounding
AEGIS Shaft Grounding Rings avoid voltage discharge through the bearings by providing a direct path for current to flow safely between the motor shaft and frame without passing through the bearings.
Key Features of AEGIS Shaft Grounding Rings
AEGIS Shaft Grounding Rings are packed with innovative features to protect motor bearings. Here are some of the characteristics that set them apart:
- Patented Conductive Microfibers: These rings use unique conductive microfibers that encircle the motor shaft, ensuring millions of discrete points for electrical discharge away from sensitive bearings.
- Environmentally Robust: Other shaft grounding methods are sensitive to humidity and fouling from debris on the shaft. AEGIS rings are insensitive to humidity, and the fibers can maintain electrical contact in the presence of small amounts of dust and debris, by sweeping the debris aside.
- FiberLock™ Channel: This design securely holds the microfibers in place, providing durability and consistent performance under varying operational conditions.
These features collectively ensure that AEGIS Shaft Grounding Rings protect motor bearings with minimal wear and virtually no maintenance required over their lifespan.
Impact on Operational Efficiency
By preventing bearing damage in VFD-powered motor systems, these grounding rings allow the energy savings and other advantages offered by drive control, without the downside of increased risk of motor bearing failure. With that risk mitigated, facilities using drives for motor control can expect lower motor failure rates, and so lower risk of extremely expensive unplanned downtime.
Case Study: “I’d rather install an AEGIS ring and be done with it”
A prime example of these benefits in action occurred at a Midwest paper mill. A 1,000 HP motor was suffering recurring bearing failure due to VFD-induced electrical bearing damage. After the mill installed an AEGIS PRO ring, the failures ceased. A plant reliability engineer summarized, “We want reliability and uptime. It’s case by case when bearings fail. You have to look at the whole motor system. But if I think that in a particular application I might have an issue, I’d rather install an AEGIS ring on the motor and be done with it.”
AEGIS: A Smart Investment for Electric Motor Systems
AEGIS Shaft Grounding Rings are a game-changer for industries that rely on VFD-controlled electric motor systems. By providing a reliable path for harmful stray current, they protect motor bearings and reduce the risk of unplanned downtime. For businesses seeking to optimize their operations, AEGIS Shaft Grounding Rings are a small investment that offer large dividends in reliability.
AEGIS rings also come with a 2-year extended warranty against bearing fluting damage. No other form of shaft grounding comes with a warranty like this.
To learn more about AEGIS shaft grounding and best practices for electrical bearing protection, sign up for a training. We offer monthly live training webinars, and we can also visit your facility to review your exact application.
Installation Flexibility with the AEGIS uKIT
Electric motor protection requires flexibility and ease of installation. The AEGIS® uKIT meets these needs with various mounting options. These Shaft Grounding Ring universal mounting kits (uKITs) are sized based on NEMA and IEC frame sizes, making part selection a snap.

The Importance of Shaft Grounding
Motors operated by variable frequency drives (VFDs) develop voltage on the shaft. Without proper shaft grounding, this voltage can destructively arc through the bearings, leading to premature bearing failure, and potentially expensive unplanned downtime. AEGIS Shaft Grounding Rings dissipate this voltage before it can arc through the bearings, protecting them from premature failure.
Why Choose the AEGIS uKIT?
The AEGIS uKIT offers a robust solution for protecting electric motors. Its flexibility and simple selection and installation make it a top choice for most motor designs.
Universal Mounting Options
The AEGIS uKIT stands out for its universal mounting flexibility. With multiple bracket styles, these kits allow for external mounting on nearly any motor design, accommodating shaft shoulders, slingers, seals, and other end bell protrusions.
Simplified Selection
AEGIS uKITs are sized based on motor frame’s shaft size (U for NEMA frames, and d for IEC). So for NEMA frame sizes from 56 to 449T, and IEC frame sizes from 132M to 355M, you don’t even need to measure the shaft.
Custom uKITs are an option for non-standard frame sizes. They offer all of the advantages of kits for virtually any size of low-voltage motor under 500 HP / 375 kW. All you need to do is measure the shaft where the ring will sit and contact AEGIS Customer Service.

Simplified Installation
The AEGIS uKIT includes a Shaft Grounding Ring, mounting brackets, and hardware to install it by drilling and tapping the motor end bell. You can also simplify installation by using conductive epoxy to attach the brackets to the motor.
Comprehensive Protection
Like all AEGIS Shaft Grounding Rings, and unlike other forms of shaft grounding, uKITs provide complete 360-degree coverage around the motor shaft. This full coverage reduces the risk of harmful electrical discharge in the bearings.
Enhanced Reliability
All AEGIS rings enhance motor reliability by mitigating electrical bearing damage. With this risk greatly reduced, that makes one less source of premature equipment failure in your plant and less risk of the huge expense of unplanned downtime.
Versatility Across Applications
AEGIS uKITs are versatile and have been successfully implemented in many applications in various industries:
Comprehensive Protection with AEGIS uKIT
If you need to protect standard frame-size electric motors from shaft voltage damage, the AEGIS uKIT is the ideal solution. These high-quality, versatile, and easy-to-install kits offer comprehensive protection and reliability. Whether in commercial buildings, manufacturing, or other industries, the AEGIS uKIT ensures your motors—and the operations that depend on them—run smoothly.
AEGIS rings also come with a 2-year extended warranty against bearing fluting damage. No other form of shaft grounding comes with a warranty like this.
To learn more about AEGIS shaft grounding and best practices for electrical bearing protection, sign up for a training. We offer monthly live training webinars, and we can also visit your facility to review your exact application.
Shaft Grounding Adds Value to Motor Repair
Motor repair is a competitive business. Many owners are selling to larger companies in an industry-wide wave of consolidations. Those who remain independent need every competitive advantage they can get.

Expertise Earns Loyalty
One critical advantage is customer loyalty. It is no longer possible to get by with only one-time customers if it ever was. To earn and keep your customers’ loyalty, you need many things. One of these is to show them your expertise. They need to see that you understand their problems and can deliver solutions.
Expertise commands a premium. If you needed your car repaired, would you take it to Duct Tape Al’s Discount Garage? If you wanted the problem to stay fixed, you would go somewhere you trust more than the duct tape guy. If higher-end companies charge a bit more for their services, that’s because their services are more valuable.
The single most valuable service you can offer is protection against unplanned downtime, the bane of every production and facility manager. For this reason, many motor repair companies have branched into predictive maintenance and related services. Other value-adding services can be offered right from your machine shop.

For Example…
Offering shaft grounding service is one example. Considering the cost of unplanned downtime, shaft grounding offers a great return on investment for your customers. Approximate costs and benefits are shown in the table to the right.
Most, if not all, motor repair companies are aware of the risk of electrical bearing damage for motors controlled by VFDs (ANSI/NEMA AR100, Section 2.2). However, it’s unclear how many motor users are aware of the risk of premature motor bearing failure. Detecting electrical damage by cutting and inspecting failed bearings for fluting, risk mitigation by installing AEGIS(R) Shaft Grounding Rings, and monitoring for risk by on-site shaft voltage testing are all good ways to show your expertise and add value to your repair service.

In Summary
Like most companies, motor repair businesses depend on repeat customers. One way to build and retain loyalty is to show your customers that you understand their problems and how to mitigate them. Your industrial customers’ most expensive problem is unplanned downtime. Any downtime-reducing service you can offer that your competitors can’t is a huge advantage.
As far as other forms of electrical bearing protection go, AEGIS rings come with a 2-year extended warranty against bearing fluting damage. No other form of shaft grounding comes with a warranty like this.
To learn more about AEGIS shaft grounding and best practices for electrical bearing protection, sign up for a training. We offer monthly live training webinars, and we can also visit your facility to review your exact application.
Protecting Motor Bearings in the Food and Beverage Industry
In the bustling food and beverage industry, every second counts. Whether mixing dough, pasteurizing milk, or processing meat, unexpected motor failures can throw a wrench in your operations.
VFD-induced electrical bearing damage is a common failure point in motors. But what if there was a way to shield motors from these pitfalls and ensure consistent uptime?
The Importance of Uptime
Uptime is more than a buzzword. Staying operational is the lifeblood of a food and beverage producer. Whether you’re running a bakery, dairy plant, or meat processing facility, any unexpected halt can lead to significant losses. Lost revenue due to spoilage, delayed shipments, and customer dissatisfaction are just a few of the repercussions you might face.
The Role of Variable Frequency Drives (VFDs)
Variable frequency drives (VFDs) control motor speed and enhance energy efficiency in many motor-driven systems. From conveyors to mixers and pumps, VFDs help optimize performance while reducing energy consumption by 20 to 30%. But these drives have their downsides. VFDs produce harmful voltage on motor shafts, leading to electrical damage in bearings.
Understanding VFD-Induced Electrical Bearing Damage
VFD-induced electrical bearing damage occurs when voltage discharges through motor bearings. This can cause pitting, fluting, and eventually bearing failure. Without proper protection, this damage can negate the cost savings achieved through energy efficiency.

The Solution: AEGIS® Shaft Grounding Rings
AEGIS® Shaft Grounding Rings offer an effective solution for dissipating harmful voltage before it can discharge through motor bearings. By providing a low-impedance path to ground, these rings protect against VFD-induced electrical damage. This effectively prevents bearing damage and helps ensure uninterrupted operations.
These bearings help:
- Prevent bearing damage: Safely dissipate harmful voltage.
- Reduce downtime: Mitigate the risk of motor bearing failure due to electrical damage.
- Save on costs: Fewer losses due to unplanned downtime and maintenance costs of motor replacement/repair.
Real-Life Examples
These rings have a place across all segments of the food and beverage industry. We have several real-world case studies from the industry:
Invest in Continuous Uptime
Protecting motor bearings from VFD-induced damage with AEGIS® Shaft Grounding Rings helps ensure uninterrupted operation. This strategic investment helps minimize loss due to unplanned downtime and helps keep productivity high. For more information, contact us today.
AEGIS rings also come with a 2-year extended warranty against bearing fluting damage. No other form of shaft grounding comes with a warranty like this.
To learn more about AEGIS shaft grounding and best practices for electrical bearing protection, sign up for a training. We offer monthly live training webinars, and we can also visit your facility to review your exact application.
Protect Your Electric Motor Bearings with Reliable Shaft Grounding
Are you concerned about damage to your electric motor bearings caused by electrical arcing? Understanding the importance of shaft grounding can save you from costly downtime and repair/replacement.
How Shaft Voltage Causes Bearing Damage
Electric motors powered by variable-frequency drives (VFDs) are prone to shaft voltage. VFDs are known for enabling energy savings and precise motor control, but they induce high-frequency voltage on the motor shaft (across the bearings). When this voltage discharges through the bearings, it causes electrical discharge machining (EDM), leading to bearing damage and premature failure.
The Consequences of Bearing Failure
When bearings fail, it can lead to catastrophic motor breakdowns, resulting in expensive unplanned downtime and repairs or replacements. The repercussions can be severe for applications relying on continuous operation, such as manufacturing, transportation, and HVAC and water treatment systems. Preventive measures are crucial to maintaining productivity.
How Shaft Grounding Works
Shaft grounding devices provide a path for harmful shaft voltage to discharge safely, preventing arcing through the bearings. These devices consist of conductive materials that divert discharge current away from the bearings. By providing a low-impedance path from the shaft to ground, they protect against EDM and help motor bearings reach their full lifespan.

The Benefits of AEGIS® Shaft Grounding Rings
AEGIS® Shaft Grounding Rings are a proven solution for protecting electric motor bearings from electrical discharge damage.
Complete 360-Degree Coverage
Unlike most shaft grounding devices, which offer partial coverage, AEGIS® Rings provide complete 360-degree protection around the motor shaft. This ensures maximum effectiveness in diverting harmful current away from bearings.
Versatility Across Applications
AEGIS® Rings are used in many industries—from manufacturing to transportation—and across different applications such as HVAC systems, food processing machinery, water treatment equipment, and electric vehicles.
Customizable Solutions
AEGIS® Rings can be sized to fit almost any rotating equipment. From motors under 1 to thousands of HP, generators, and turbines, we can make an AEGIS® Ring to fit your shaft.
The Unique Advantage of Warranty Protection
One key advantage of AEGIS® Shaft Grounding Rings is our comprehensive warranty protection. We offer a 2-year extended warranty against bearing fluting on motors with AEGIS(R) rings installed according to our best practices.
Ensuring Long-Term Motor Health with AEGIS® Shaft Grounding Rings
Protecting VFD-driven motor bearings from electrical damage is crucial for maintaining operational efficiency. Reliable shaft grounding systems like AEGIS® Shaft Grounding Rings offer a proven solution, ensuring long-lasting protection against bearing failures caused by stray current.
For more in-depth information on safeguarding your motors, download our product sheet or Bearing Protection Handbook.
AEGIS rings also come with a 2-year extended warranty against bearing fluting damage. No other form of shaft grounding comes with a warranty like this.
To learn more about AEGIS shaft grounding and best practices for electrical bearing protection, sign up for a training. We offer monthly live training webinars, and we can also visit your facility to review your exact application.
Why Motors with AEGIS Rings are a Smart Investment
Electric motors power everything from industrial machinery to HVAC systems, so their reliability and longevity are critical. When motors are powered by variable frequency drives (VFDs), they need extra protection. Motors with AEGIS® Shaft Grounding Rings factory-installed offer unparalleled protection against electrical bearing damage, and they come with a 2-year extended warranty to back it up.
What is Bearing Fluting and Why Should You Care?
Bearing fluting is a common problem in motors driven by VFDs. This phenomenon occurs because VFDs create a voltage on the motor shaft, which often discharges by arcing through the bearings, creating microscopic pits. Over time, this can lead to fluting and premature bearing failure, resulting in unexpected downtime and expensive repairs or replacement. The solution? Giving shaft voltage a safe discharge path– away from the bearings.
AEGIS Rings: A Proven Ssolution
AEGIS Shaft Grounding Rings are specifically designed to discharge these harmful electrical currents safely to ground. They use a patented 360-degree array of conductive microfibers to surround the motor shaft, ensuring reliable contact and effective grounding. With factory-installed rings, you get the peace of mind that your motor bearings are protected from the moment the motor is put into service.
Factory-Installed For Your Convenience
Choosing motors with AEGIS Rings factory-installed means you don’t have to worry about retrofitting or additional installation steps. The grounding rings are already in place, designed to work seamlessly with the motor’s architecture. This saves you time and effort and ensures a level of integration that can be hard to achieve with aftermarket installations.
Motors with AEGIS installed are easy to find, too – Most major motor manufacturers offer motor lines with AEGIS rings included standard and are also available as a mod. You can view the list of manufacturers and motor lines with AEGIS installed here.
An Extended Warranty For Extra Confidence
One big benefit of investing in motors with factory-installed AEGIS rings is their 2-Year Extended Warranty against bearing fluting damage. This warranty is a testament to our confidence in our product’s effectiveness. It also gives you additional assurance that your investment is protected. If bearing fluting occurs within two years, you’re covered. This kind of warranty is rare in the industry, highlighting the value of these grounding rings.
We frequently see volume motor users – colleges, school districts, data centers – register motors with AEGIS factory-installed for the Warranty, often one after another. For multiple simultaneous registrations, we offer a spreadsheet to let you avoid filling out the online registration form repeatedly.
A Smart Investment with Long-Term Benefits
In a world where downtime is costly, and reliability is paramount, investing in motors with AEGIS Shaft Grounding Rings makes perfect sense. With factory-installed grounding rings, you reduce the risk of unplanned downtime by reducing the risk of premature bearing failure. Plus, the 2-year extended warranty offers a safety net, protecting you if anything goes wrong.
Overall, motors with AEGIS Shaft Grounding Rings factory-installed are a smart investment for any business that relies on electric motors. They offer high protection, convenience, and confidence, ensuring that your motors — and your operations — run smoothly for years to come.
To learn more about AEGIS shaft grounding and best practices for electrical bearing protection, sign up for a training. We offer monthly live training webinars, and we can also visit your facility to review your exact application.
What is a Variable Frequency Drive (VFD)?
In today’s rapidly advancing technological landscape, the efficiency and control of industrial equipment are paramount. One technology at the forefront of enhancing motor performance and energy conservation is the variable frequency drive (VFD). In this post, we will look more at these common motor controllers.
Understanding Variable Frequency Drives
A variable frequency drive is an electronic system that controls the speed of an AC motor by varying the frequency of electricity supplied to it. VFDs allow for precise control over motor speed and torque, which has two big advantages. For one, precise speed or torque control is needed for many industrial processes. And running motors at reduced speed saves large amounts of energy.
How Does a VFD Work?
VFDs have three core components:
- Rectifier: The first stage involves converting AC power into DC power using diodes.
- DC Bus: The DC power is then smoothed out to create a stable voltage using capacitors.
- Inverter: Finally, this DC is converted back into variable frequency AC power using switches such as IGBTs (Insulated Gate Bipolar Transistors).
Most modern VFDs use pulse width modulation to control their output frequency. Their output is a series of pulses in each phase. VFDs can efficiently manage motor speed and torque by varying the pulse width (duration) and timing.
Advantages of Using VFDs
The use of VFDs offers several technical advantages that improve overall system performance and cost-efficiency:
- Energy Savings: Significant energy savings are achieved by operating motors at needed speeds rather than constant full speed.
- Longer Motor Life: In applications with many start/stop cycles, gradually ramping the speed up and down reduces mechanical stress on motor components.
- Improved Process Control: With precise speed control, processes can be optimized for better quality and throughput.
- Reduced Maintenance Costs: Lower and smoothly varying speeds mean less wear and tear on gears, belts, and bearings.
These benefits underscore why VFDs are a common component of modern industrial electric motor systems.
The Impact of VFDs on Motor Bearings
While VFDs offer numerous benefits, they do come with their own challenges. One such problem is electrical bearing damage. The pulsed nature of drives’ output induces unwanted voltage on the shafts of motors on VFDs. If not adequately managed, this voltage will discharge through the bearings, causing electrical damage. Some of the problems caused by shaft voltage are:
- Bearing Pitting: When shaft voltage discharges by arcing through the bearing, it forms microscopic pits and fusion craters on the bearing surfaces.
- Grease Degradation: This arcing chemically degrades grease, reducing its lubricating properties. It also leads to contamination with metal particles “blasted out” of the pits described above.
- Cumulative Damage: Over time, continued electrical erosion can lead to bearing fluting, resulting in increasing noise and premature bearing failure.
To combat these problems, the AEGIS® Shaft Grounding Ring provides a safe discharge path for shaft voltage, through the ring instead of the bearings. Our rings employ proprietary conductive microfibers that channel discharge current away from the bearings.

AEGIS® Shaft Grounding Rings and Your Bottom Line
With AEGIS® Shaft Grounding Rings integrated into your systems, you can reduce motor repair/replacement costs and, more importantly, protect your operations from the huge costs of unplanned downtime.
Explore our Bearing Protection Handbook for more information, or contact us today to find out how to integrate AEGIS® technology into your operations for lasting benefits.
AEGIS rings also come with a 2-year extended warranty against bearing fluting damage. No other form of shaft grounding comes with a warranty like this.
To learn more about AEGIS shaft grounding and best practices for electrical bearing protection, sign up for a training. We offer monthly live training webinars, and we can also visit your facility to review your exact application.