Language:

AEGIS® Bearing Protection - Why Shaft Grounding?

 

Best Practices

The AEGIS® Ring conducts harmful shaft voltage discharge currents away from the bearings to ground. These currents travel from the shaft, through the conductive microfibers, through the housing of the ring, through the hardware (or conductive epoxy) used to attach the ring to the motor, to ground. All paths must be conductive.

Note: Overspray on end bracket must be removed to
ensure a conductive path to ground. Clean all fits.

 

Application notes are intended as general guidance to assist with proper application of AEGIS® Bearing Protection Ring to protect motor bearings. All statements and technical information contained in the application notes are rendered in good faith. User must assume responsibility to determine suitability of the product for its intended use.


Read the AEGIS® Blog

31 Winterbrook Road Mechanic Falls, ME 04256
ISO 9001:2015 Certified
Phone: +1 207-998-5140   Toll Free (U.S.): 1-866-738-1857  Fax: +1 207-998-5143

Email: | Terms & Conditions | For other static solutions»